Hello,
We use the wl1837 module on the SK development board. What should we do if we want to reset the module during operation?Hope to receive your reply!
Part Number: WL1837MOD Other Parts Discussed in Thread: WL1837 Tool/software: Hello everyone,
We use imx8mp with wl1837 wlan module, kernel version is 6.12.13, and we use calibrator tool which is provided by 18xx-ti-utils to perform regulatory test.
The…
We need permission from TI to use their test reports from the ANATEL certification for our own ANATEL certification
We already have these test reports. Are there newer test reports on the portal?
TI must sign the document in any case so that we can also…
Part Number: WL1837MOD Tool/software: Hello expert,
Our customer has the following question.
■ Background The AP (WL1837MOD) is set to connect both the 2.4 GHz and 5 GHz band,
We would like to lead connecting by the 5 GHz band when 2.4 GHz band is congested…
Part Number: WL1837MOD Tool/software: Hi there,
We seareched this link:
https://www.ti.com/tool/WL18XX-CERTIFICATION but couldn't find the following for WL18DBMOD:
EN 301.893 (for 802.11a)
EN 301.328 (for 802.11 b, g).
Could you point us to these…
Part Number: WL1837MOD Tool/software:
Regarding case No. CS2634021
Hi, thanks for the information, and from TI REPORTS I have downloaded folder WL18MODGI_Cert_Reports_5_20_00_00
But for ISED Canada, folder has test report CA741330_R01_RF Exposure_Texas_WL18MODGI…
Part Number: WL1837MOD Tool/software: Hi Sir,
We have submitted our device with WL1837MOD for RED testing .
From testing laboratory side, we have got one query regarding the fixed frequency software.
Please provide the fixed frequency software for mentioned…
Part Number: WL1837MOD Tool/software: Hi,
we encountered in an issue during SRRC certification. The lab requires to change the SRRC limit for 5.1G WIFI sensitivity into -75dBm/MHz. How we can do it?
Part Number: WL1837MOD Tool/software: Hi,
we encountered in an issue during SRRC certification. The lab requires to change the SRRC limit for 5.1G WIFI sensitivity into -75dBm/MHz. How we can do it?
Hey Daniel,
Solder doesn't really melt at that low of temperature so I wouldn't really expect soldering issues from applying that heat to the module. You can see our reliability tests ran on this module here: https://www.ti.com/quality-reliability…