Part Number: XTR108XTR108 in datasheet showed typ internal oscillator 210KHz, technically/theoretically what are the way i can measure oscillator freq?
is it by measuring timing/period from CS2 pin?
appreciate your knowledge sharing.
Part Number: XTR108 Other Parts Discussed in Thread: XTR117 , XTR106 , XTR115 , Hi Team,
Our customer would like to know the sampling rates and division of data of the XTR108, XTR117,XTR115 and XTR106. I have checked the datasheets but I didn't find these…
Part Number: XTR108 Other Parts Discussed in Thread: XTR115 , PGA308 , XTR106 Hi,
On the XTR108 datasheet, it mainly explains about the RTD resistor and briefly explains on bridge sensor. I am wondering if there is any application notes or full instruction…
Part Number: XTR108 Tool/software: WEBENCH® Design Tools Good morning, can I design the xtr108 with your application? (TI Design Tools), if so, could you help me where I should go, thank you very much
Hello Alexander, about my circuit i debug it again today, there are still some problems. This time I detect the signal of the "CS2" and "SCLK" in the XTR108 through Oscilloscope.
In the circuit of XTR108 EVM:
1.when I click the "Read…
Part Number: XTR108
According to the datasheet for the XTR108, the registers with unused bits should be filled with '0'. Using your calibration software and development board it appears that for PGA Gain, PGA input and Iref, the software is filling…
Part Number: XTR108 I have a XTR108EA/2K5 and wanted to give it an external reference voltage. The industrially trimmed, internal, nominal reference voltage seems to be 1.193 maximum looks to be 1.4 V, but what is the minimum input voltage ref, and what…
Part Number: XTR108 Tool/software: TI-RTOS hello good night, I would like you to help me by providing a basis for how to program this xtr108 q I find it very interesting for your communication spi, (like some ADS11118Q1 that I acquired some time ago)…
Hi Leo,
I should have asked before, have you tried this testing with the RBD bit set to 1? That should prevent the XTR108 from refreshing its register settings from external EEPROM before the EEPROM is programmed.
Part Number: XTR108 Other Parts Discussed in Thread: XTR117 Can the XTR108 be easily ranged for offset and span at room temperature without doing a full thermal calibration? For example when interfacing a sensor that is already compensated and you just…