Part Number: LP5912-Q1 Hi,
Good Day.
In the datasheet for this part, it states on Page 5 that the dropout voltage is not a valid condition for output voltages below 1.6V. Since this part is a fixed output LDO of 1.1V, what does this note mean?
Let me…
Part Number: PCM1690 Only the first 4 channels are working and we can’t get the channel 5/6/7/8 working. The board is used in Hardware mode. The configuration used is the I2S mode in single rate:
The input is the following:
The configuration…
Part Number: SN74LVC2T45 Other Parts Discussed in Thread: 5-8-LOGIC-EVM Hi,
I am trying to evaluate the SN74LVC2T45 and the generic 5-8-LOGIC-EVM is the recommended TI tool. However I do not see any diagrams in user guide to tell me how the layers are…
Part Number: ADS1299-4 Hi,
We are currently using the ADS1299-8 channel and have populated all 8 channel inputs using an RC circuit, as per the datasheet.
We would like to swap out the 8 channel with a 4 channel chip (ADS1299-4) and would like to know…
Part Number: SN74LVC1G125 Other Parts Discussed in Thread: SN74LVC1G240 , , SN74LVC2G241 , SN74LXC1T45 Dear TI support team,
I am struggling with a very strange problem. I would like to have a 3.3 V MCU communicate on a 5V SDI-12 bus (cf. https://sdi-12…
Part Number: TMS320F280049
Dear guys,
I wonder what the title of the first column means in the table attached below. "0,4,8,12" means what? I know that the first column lists the sequential GPIOs, but "0,4,8,12" ??
Hope someone…
Part Number: TPS25947
hello team:
in the datasheet of tps25947,Table 8-5 mentions some PG output states. in some cases, only the PG state is mentioned when the PGTH pin voltage is less than Vpgthf, and the state when the PGTH voltage is greater than…
Part Number: LMP7715 Hi Team,
My customer requests for EVB for LMP7715MFX/NOPB (SOT23-5) and I'm confused with all packages types. Could you help?
(1) I'm looking at DIYAMP-SOT23-EVM . Is it available for SOT23 5-pin? The user's guide does not…
Jason,
We, TI, do not have an expertise or suggestions on this specific question to add the locale.
I would recommend checking with the Yocto mailing list for suggestions/options.
Regards
Karthik
Part Number: TUSB2077A Greetings,
I have a question regarding the TUSB2077A.
In my customers application, pin 47 () is always tied to logic high (3.3v) and they'd like for the overcurrent detection to be in ‘ganged’ mode.
What logic level…