8053.KCU105 HSDC Pro User's Guide.pdf KCU105 + ADC and DAC38J8x Configuration.pptx Yawen,
Attached are some examples using the DAC EVM with a KCU105. We do not have any examples using the ZCU board.
Regards,
Jim
Branden,
It appears you have an issue with the CGS stage. Have you checked the alarms that are reported in the "Alarms and Errors" tab of the GUI? In most cases I have seen, the LMK04828 output clock used by the FPGA has the wrong divider. The GUI settings…
6813.KCU105 HSDC Pro User's Guide.pdf Isabel,
Can you try a test using your settings and follow the Vivado loading instructions in the attached users guide to verify your setup is working properly using our HSDC Pro GUI. This comes up just fine with…
Other Parts Discussed in Thread: ADC12J4000 , LMK04828 , TRF3765 Hello~~ all.
I Use ADC12J4000 EVM board.
After the power on it can be executed automatically without clicking the "program clocks and ADC"?
I want to enable operation without running…
Erdal,
You can download example source code from Xilinx using the link found in the User's Guide document attached. The other link provides source code for an example that uses the KCU105 with a TI ADC12DJ3200EVM.
Regards,
Jim
4846.KCU105 HSDC…
Dan,
We have tested the ADC32RF45EVM both with a Xilinx VC707 and KCU105 platform. We have not tested the TSW40RF80EVM with any Xilinx platforms but it should work. For more information regarding this, download the TSW14J10EVM User's Guide from the…
Bryan,
Which Xilinx FPGA are you targeting? We have examples of Xilinx source code using the KC705, VC707, and ZC706 under the TSW14J10EVM product folder on the TI website. There is also some examples using the KCU105 on the Xilinx website. See the…
Richard,
When dividing by 1 with the DCLK in the LMK tab, you must set the DCLK Divider to "Divider+DCC+HS". Other wise the output is unstable. In our example when using a very similar setup (see attached), we provide a core clock that is the ADC sample…
5078.KCU105 HSDC Pro User's Guide.pdf Mason,
You can plug the DAC38J84EVM directly into the KCU105. The other FMC board is only used with the KC705, VC707, and ZC706. Please see the attached file for more information.
Regards,
Jim
John,
Yes we have. Go ahead and download the User's Guide from the TSW14J10EVM product folder on the TI website to see examples used with the VC707 and the ZC706. Firmware for these examples can be downloaded from this site. We have also tested a DAC38J84EVM…
