Search tips
Showing 35 results View by: Thread Post Sort by
    Answered

  • Analog Down Converter IC

    Resolved
    Other Parts Discussed in Thread: ADC3244 , ADC3664 , ADS5407 Hi I have a optical reciever which down converts activity of 0-8Khz occured over THz light signal to to RF Signal of frequency 200MHz and the signal of interest would lie arround the 200Mhz…
    • Resolved

  • Is it suitable as an adc to be used for infrared noise canceling?

    TI Thinks Resolved
    Other Parts Discussed in Thread: ADS4145 , ADC3244 , ADC3224 , ADC3664 The infrared signal containing noise is divided into two signals so that the phase is 180 degrees. Communication data is communicated at 1 mhz, and at this time, it converts even ambient…
    • Answered

  • RE: ADC3444: LVDS spec

    Resolved
    Ajayt, Please see the ADC3244 data sheet for the correct values. This will get fixed on the next release of the data sheet. Regards, Jim

  • Given a gain of Unity and a gain of X64, what would be the best Amp design to drive this ADC with the input voltage peak being clipped to less than the recommended 2.1 max.

    Other Parts Discussed in Thread: ADC3244 , LMH6553 The ADC3244 has a 2.1V max input at the ADC. My signal from the output of the previous stage is single ended. The voltage could go as high as 5V and while this is not a problem from the point of view…

  • RE: ADC32J44: ADC32J4x flicker noise

    Roger, it is correct that the ADC32J44 is not supporting the chopper mode feature while the ADC3244 with LVDS interface does. We will be getting back with more details on the flicker noise performance shortly. Best regards Matthias

  • ADC3244EVM: ADC sample data seems weird

    TI Thinks Resolved
    Part Number: ADC3244EVM Other Parts Discussed in Thread: ADC3244 I'm using ADC3244 EVM, running it by default settings (two-wire mode). Given 60MHz CLKIN, I got 30MHz FCLK and 210MHz DCLK. The analog input channel is driven by constant voltage. …

  • RE: High Speed Data Converter (HSDC) Pro Software Output Binary File Format

    Hi Roger The ADC3244 is a 2 channel ADC. The Save Raw ADC Codes as Binary File saves both channels of data into a single file as follows: [LSByte S1 Ch1] [MSByte S1 Ch1] [LSByte S1 Ch2] [MSByte S1 Ch2] [LSByte S2 Ch1] [MSByte S2 Ch1] [LSByte S2 Ch2…

  • RE: ADS6445: ADC EVM with DC coupled high impedance analog inputs

    Hi Richard, Thanks for the detailed reply. I understand the EVMs are designed for the most common AC coupled applications your customers use these high speed ADCs for. Our application is for acquiring near DC signals from a sensor array. We are switching…
    • Answered

  • RE: ADC3422: Question for schematic of TSW3422EVM TIDA-00799

    Resolved
    Hi Xiaoqiang, Since the ADC3244 has an unbuffered analog input, the low pass filter cutoff frequency (fc) should be at or below the sample rate. Doing this will help to attenuate the glitch/kickback energy from the switching of the ADC sample/hold capacitors…
    • Answered

  • HSDC Pro Ver 4.70 Binary Output Data File Numbers

    Resolved
    Other Parts Discussed in Thread: ADC3244 Hello, After some forum help I am able to read and parse the HSDC software output binary data file. I'm using the TSW1400EVM and the ADC3244EVM. The ADC3244EVM has a 14 bit ADC3244 converter on it. The ADC is…
    • Resolved

Didn't find what you are looking for? Post a new question.