Part Number: ADC3444 Hello,
According to the data sheet, the 8 point sine wave test pattern has an output of "0, 2399, 8192, 13984, 16383, 13984, 8192, 2399" but my customer is getting "0A5E, 10B4, 2000, 2F4B, 35A1, 2F4B, 2000, 10B4" using the part…
Part Number: ADC3444 Tool/software: Hello,
We are working with a custom board that integrates multiple ADC3444 chips. These ADCs are grouped such that half of the chips receive their sampling clock from one HMC7044 clock generator, while the other half…
Part Number: ADC3444 Hello Experts,
I want to test the ADC3444 converter with the following input frequencies 191 MHz, 90MHz and 70 MHz but since my sampling frequency is 120MSPS will i get the desired output and parameter values ?
Are the SINAD/SNR…
Part Number: ADC3444 Tool/software: Hello,
I am using the ADC3444 chipset and facing an issue with the test pattern output. I am converting the differential output data to single-ended using IBUF , and then using IDDR to capture both rising and falling…
Part Number: ADC3444 Tool/software: In my project, I am using the ADC3444, and we are planning to use the AXI Quad SPI controller for control purpose it's from Xilinx. The AXI Quad SPI controller in standard mode supports 8, 16, or 32-bit data frames…
Part Number: ADC3444 Other Parts Discussed in Thread: DAC34SH84 Tool/software: Hello TI team,
I am working on a custom design using the ADC3444 and DAC34SH84 , both connected through an FMC card to FPGA. My goal is to implement the following data flow…
Part Number: ADC3444 Tool/software: Hi Team, For SI check, could you please provide the insertion loss and return loss limits and eye width and eye height for LVDS interface for P/N : ADC3444
Part Number: ADC3444 Tool/software: Hi Team,
I am using the part ADC3444. Does length matching is required between every differential pair of ADC3444? Or length matching only P&N is sufficient?
I am requesting length matching details for both analog…
