Part Number: ADS54J40EVM Other Parts Discussed in Thread: LMK04828 , ADS54J64 , ADC32RF45EVM I notice that when I select the config files for running the quick start procedure, I select the file with 983.04M sampling rate? I also note that other options…
Part Number: ADS54J40EVM Other Parts Discussed in Thread: ADS42JB69EVM ADS54Jxx EVM GUI software throws a series of 5 error messages on start-up. The software does not appear to function afterwards. It doesn't interact with the eval kit at all. The…
Part Number: ADS54J40EVM Other Parts Discussed in Thread: ADS54J40 Hi,
My customer is using ADS54J40EVM and KCU105. But HSDC Pro doesn't have ADS54J40_LMF_8224.ini file. Could you give me ADS54J40_LMF_8224.ini file, please?
Best regards, Shimizu
Hi Cho,
I sent you a friend request on E2E to move things offline. Please direct message me with your email so that you can send along your schematics to verify. In the meantime, please refer to the TI EVM schematic for the ADS54J40 here:
https://www…
Dessislav,
The same answer I sent regarding the ADS54J40EVM also applies to the DAC3xJ8xEVM. The only difference is the Zynq platforms did not route the SYNC+/- pins to the correct FMC pins per the Vita-FMC standard. To use these platforms with the DAC…
Hi
Please use the following file to update the ftdi template.
TSW12D1620.xml
<?xml version="1.0" encoding="utf-16"?>
<FT_EEPROM>
<Chip_Details>
<Type>FT4232H</Type>
</Chip_Details>
<USB_Device_Descriptor>
<VID_PID>0</VID_PID…
Part Number: TSW14J56EVM I have a TSW14J46EVM and and ADS54J40EVM aand I am trying to use the HSDCPro Automation DLL to automate the data capture using MATLAB. I have a few questions on getting it to work
1. My board serial number is T827D8un as written…
Other Parts Discussed in Thread: ADS54J40EVM Tool/software: TI C/C++ Compiler Hi
We are using the TSW14J56EVM together with ADS54J40EVM.
Using these cards we are experiencing two main difficulties:
The ability to reduce the density between pulses, most…
Hi Jim,
Another question regarding the ADS54J40EVM board.
We are using the VCO 122.88 Mhz as the source to get the ADC clock.
The configuration allow us to chose the 943.04 Mhz.
Can we change it say to 960 Mhz?