Part Number: ADS7229 Dears:
My customer wants to use ADS7229, but their fpga engineer do not understand ADS7229,so they want to ask whether Ti has fpga control software samples about ADS7229 ? if have, please provide it for customer reference,many th…
Part Number: ADS7229 Dears:
After power-on, the first data is written to the CFR register, configured to automatic mode, and then the EOC is checked to read the data,but EOC is always in a low level, I don’t know what is wrong , could you help me give…
Part Number: ADS7229 Hi team,
Customer uses CPLD to control ADS7229, because they need to use state machine, they need to know how the workflow of ADS7229 is.
For example: register (CFR) configuration through SPI interface --> start conversion --> wait…
Part Number: ADS7229 Tool/software: WEBENCH® Design Tools Hi,
Can anyone help me how to do functionality, VOH and VOL test for ADS7229? we are not sure which pins to connect and perform the test. we are using the virtual bench to test the device(ADS7229…
Part Number: ADS7229 On a ADS7229, I'd like to have \CONVST idle low and do nothing, occasionally, a pulse high for 50us to sample, and start the conversion on the negative edge. /CONVST would remain low for a long time before being pulsed again. Any…
Part Number: ADS7229 Dear Support,
I am writing you concerning a serious issue we are experiencing with the ADC ADS7229. The application I am working on consists of 16 identical acquisition channels based on this ADC. The ADCs are controlled independently…
I'm a university student doing a mini project on ADCs. Could someone please explain what is input leakage current in the datasheet? Does it refer to the current draw from analog input?
Other Parts Discussed in Thread: ADS7229 , TIPD114 Hello,
My customer have some questions about ADS7229.
[Q1]
Does it need the reference (buffer) driver ?
Can it connect the Voltage Reference IC with a 22uF capacitor ?
[Q2]
Can it use REF32xx as the Voltage…
Other Parts Discussed in Thread: ADS7229 Hi, I have a question about behaviour of the ADC device ADS7229.
I want to control the device in manual trigger, read while converting, EOC/Int active low mode with EXTERNAL CLOCK. For our case, the Internal clock…
Other Parts Discussed in Thread: ADS7229 , ADS8327 Hello,
I'm getting started with the ADS7229. I was wondering if anyone could point me to some example code for communicating with it (say from a 4-wire multi-channel buffered serial port)? Thanks…