Part Number: ADS8320 hi dear supporting team,
customer is using ADS8320 with below sch(share the same circuit with AD7683). They found there is close to 1V glitch at Vin pin, which has same cycle with Cs signal. the input is disconnect with previous stage…
Part Number: ADS8866 Other Parts Discussed in Thread: ADS8320 Hello I want to know about ADS8866 specification.
The ADS8866 datasheet lists only operating ambient temperature (free-air temperatrue (Ta))
I want to know the Junction Temperature (Tj) and…
Part Number: ADS8320 Hello Community,
On page 33 of the document attached, there are two equations with respect to a pole and zero being produced. Since this forms an LPF RC filter, the 1/ReqC makes the pole understandable, but I don't understand where…
Part Number: ADS8320 Hello,
I'm currently using the ADS8320 in one of my designs. However, I have a question about the configuration of the external RC filter. Does this have to be a differential filter, like stated in the layout example as the first…
Part Number: ADS8320 Other Parts Discussed in Thread: ADS7056 Currently, I am working on a project where I’d like to use the ADS8320 A/D convertor. The only remaining open issue is the choice of reference voltage. Therefore I have some questions regarding…
Part Number: ADS8320 I'm interested in using this part to sample at 400Hz. Figure 23 in the datasheet shows the power consumption down to 1kHz. Does the curve continue to fall linearly (by 2.5x) if I sample at 400Hz, instead of 1kHz. Is there a static…
Part Number: ADS8320-HT Hi,
I am looking at ADS8320-HT as a potential candidate on one of our design
They website puts the INL of this ADC to be Max +/-2.1 LSB. But when I read the datasheet, I see the spec in FSR.
The max being +/-0.032 % of FSR for…
Part Number: ADS8320 Other Parts Discussed in Thread: CC2640 Hi,
One of my customers intend to use the ADS8320 in combination with a CC2640 and connect it to the SPI interface.
Sample frequency has to be 100KHz.
The timing diagram of the ADS8320 shows…