Part Number: AM3352 When booting from SPI Flash memory, a glitch waveform appears in CS and CLK before SPI read access starts. This waveform may cause the Flash memory to go into a busy state.
Please tell me the cause of glitch waveform and how to prevent…
I reviewed the spreadsheet that was sent. Step 3 and 5 says to write to the MAIN_RST or DMA_RST and CORE_RST, but it appears that you are doing both.
You should either do line 1722 and 1729 (remove 1720,1721,1727,1728)
OR
keep 1720,1721,1727,1728 and…
Part Number: AM3352 Hi,
We are using the AM33 processor P/N: AM3352BZCZA100 which does not support Secure boot (HS version).
Can you help me with the below questions? - What is the matching P/N to have HS supported? - What Linux Kernel supports the HS version…
Part Number: AM3352 Hi,
1.What is the IoL(Max) of AM3352 LVCMOS pin in the picture below? (VDDSHVx=3.3V)
2.What will be the impact if the actual measured IoL=7.3mA exceeds 6mA?
Part Number: AM3352 Hello,
We have our own design based on the am3352, and we do not have an external 32Khz oscillator connected to RTC_XTALIN and RTC_XTALOUT.
So far we have been using u-boot and kernel from SDK 05.03.00.07, and now we are trying to…
Part Number: AM3352 Other Parts Discussed in Thread: TPS65910
Hi Support Team,
The following voltages are applied to the VDDSHVs of AM3352.
VDDSHV1,2,5: 1.8V VDDSHV3,4,6: 3.3V
3.3V is taken from a different IC from TPS65910, The rise time of 3.3V is about…
Part Number: AM3352 Hi,
I would like to know about the settings of the AM3352's PLL and LCD controller. Can I ask a question via private message as it contains confidential information?
Thanks,
Conor
Part Number: AM3352 I'm having some difficulty getting the above configuration to actually pass traffic from the switch to the processor. I'm trying to just use the PHY in "dumb" mode, I don't need DSA or anything like that, but have also tried everything…