Part Number: AM4378 Hi,
Does AM4378 ISA Support support all of the following? ・Armv7-A ・Thumb-2 or Thumb ・TrustZone security technology ・Jazelle DBX and RCT technologies ・DSP extention ・Neon (Optional) ・Floating Point (Optional) Excerpt from https://developer…
Part Number: AM4378 Greetings,
We have a requirement for our product to have six byte unique identifier and we've been considering the use of either the Ethernet MAC address or an external serial number IC to provide this unique identifier. To date…
Part Number: AM4378 Hi,
There are 8bit and 16bit types of NAND Flash connected to AM4378. AM4378 is compatible with both, but if I want to proceed with development using TI's SDK, would it be better to use 8-bit NAND-Flash? Are there any advantages to…
Hi James,
James Steenbock said: The configuration you shared should work as you described, although you may want to add a resistor to GND on the AC pin just to make sure the pin doesn't float between GND and some high voltage.
As shown in the image…
Part Number: AM4378
Hello,
We have a custom board based mainly on the am437x-evm board, this custom board works great on our current processor-sdk (8.01), I am trying to migrate it to 9.01, the systems boots and its usable from the cmd line but I am…
Part Number: AM4378 Hi TI
My customer is currently developing with AM4378BZDND100. And they consider to swicth to AM4378HS device.
Can you please let me know if AM4378BZDND100 device can be pip-to-pin comopatible with AM4378HS device?
If yes, I would…
Part Number: AM4378
I am porting our system from ti processor-sdk 8.x to 9.01, I am having an issue when running the QT Application on the ported system. We are not using Wayland, hence we removed it from the DISTRO_FEATURES, so the QT application uses…
Part Number: AM4378 Hi,
I have received a question from a customer regarding a device for Boot. They use uITON as their OS and make their own Boot program and drivers, so their question is about a bare device.
They are considering MT25QL02GCBB8E12-0SIT…
Hello Shea,
Good evening.
You should have the received the thermal model.
Please provide your feedback when you have a chance to work with the model.
Regards,
Sreenivasa
Part Number: AM4378 Hi,
I am designing a board with the TI AM4378 processor and I wanted to know what the eMMC Read hold time requirements are. The eMMC_Data[0:7] is connected to GPMC_AD[8:15]. The CLK and CMD are connected to MMC1_CLK and MMC1_CMD respectively…