Part Number: AM5718 I have the following SDKs installed:
1. ti-processor-sdk-linux-am57xx-evm-08_02_01_00
2. processor_sdk_rtos_am57xx_08_01_00_09
While building IPC examples, I ran into errors as follows during "make ti-ipc-linux":
======…
Part Number: AM5718 I have the following SDKs installed:
1. ti-processor-sdk-linux-am57xx-evm-08_02_01_00
2. processor_sdk_rtos_am57xx_08_01_00_09
While building IPC examples, I ran into errors as follows during "make ti-ipc-linux":
======…
Hello Ilan,
The IPC version you are using is indeed not the one that is supported by the Linux 5.10.
Please see
Josue Zamitiz-Ayala said: See this FAQ: https://e2e.ti.com/f/791/t/1304306
Best,
Josue
Part Number: AM5718 May I ask if the AM5718AABCXA chip has an automatic frequency reduction function? If the chip temperature exceeds 105 degrees, can it automatically reduce power consumption?
Hi Mark,
Do you mean HS200 can work at 3.3V VCCQ although eMMC support dual voltage
Can we just change the upper schematic to connect VCCQ to 1.8V and pull up data line to 1.8V to work at 1.8V IO for HS200?
Part Number: AM5718 Other Parts Discussed in Thread: SYSCONFIG Hi,
we have developed a custom board with an AM5718. Using SysConfig we have also determined the “best” pinmux configuration.
Yesterday, during software development on our board…
Hi Harshil,
The meaning is your number 1.
Harshil Soni said: 1) Is USB3.0 feature is not supported in latest SDK
I understand that this answer is conflicting from a practical standpoint, i.e. USB3 works but SSC is not enabled, therefore not adhering to…
Hi,
I was thinking from the perspective of if there is some communication required between phy and MAC to set up the MAC for communication at all and hence my question about the phy link status. But because its RMII, I am not sure if this could be a reason…
Hello Jiablin, I believe this is a continuation from this thread: https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1278293/am5718-low-singnal-on-porz-can-t-restart-the-linux-in-am5718-plat Can you confirm? -Josue