Search tips
Showing 1,637 results View by: Thread Post Sort by

  • DCA1000EVM: Differences between Studio CLI Tool and DCA1000EVM CLI commands available in mmWave Studio

    TI Thinks Resolved
    Part Number: DCA1000EVM Other Parts Discussed in Thread: IWR6843ISK , AWR2944 , IWR6843 , AWR1843 Hi, For capturing ADC data from xWR sensors, what are the differences between using Studio CLI tool and DCA1000 CLI commands available in mmWave studio…
    • Answered

  • AWR2944EVM: Activating 3TX DDMA Demo

    Resolved
    Part Number: AWR2944EVM Other Parts Discussed in Thread: AWR2944 Hello, I'm attempting to use the AWR2944 DDMA demo to make use of only 3TXs, only the azimuth antennas. I do not want the elevation antenna activated or processed. I changed the…
    • Resolved

  • AWR2944EVM: What else chips are replacement for flash (GD25B64CWAG) used in AWR2944EVM ?

    Part Number: AWR2944EVM Other Parts Discussed in Thread: AWR2944 , The flash chip GD25B64CWAG is hard to be bought. We are developing a test board based on AWR2944. Is there any flash chip supported by the demo firmware used in AWR2944EVM ? Thanks

  • AWR2944EVM: CAN Bring up

    Part Number: AWR2944EVM Other Parts Discussed in Thread: UNIFLASH , AWR2944 Hello Experts, 1. According to the schematics TRCV STB pin is connected to PMIC and it's by default it's connected to pull up resistor. Do I need to initialize the whole PMIC…
    • Answered

  • AWR2944EVM: An error occurred after I called the rlFrameStartStop function

    Resolved
    Part Number: AWR2944EVM Other Parts Discussed in Thread: AWR2944 Hi Team, After the awr2944 is powered on, the function MmwDemo_dataPathStart() is called to set procChainStatus to 0x1, and the dpc works normally. 1. Then I call the function rlFrameStartStop…
    • Resolved
    • Answered

  • LP87745-Q1: LP87745-Q1:

    Resolved
    Part Number: LP87745-Q1 Other Parts Discussed in Thread: AWR2944 , AWR2944EVM I am trying to work with the watch dog timer. As soon as I write to the WD_LongWIN, I get a PMIC reset which resets my whole system. I have already disabled the CRC interrupt…
    • Resolved
    • Answered

  • AWR2944EVM: Erase or format the flash of AWR2944EVM

    Resolved
    Part Number: AWR2944EVM Other Parts Discussed in Thread: UNIFLASH , AWR2944 , IWR6843 Hi Experts Since AWR2944 is already supported by uniflash 7.2.0, how do we erase or format the flash of AWR2944EVM through uniflash or python script?
    • Resolved

  • DCA1000EVM: freezes after 75 seconds

    Part Number: DCA1000EVM Other Parts Discussed in Thread: AWR2944 , IWR1843BOOST DCA1000EVM is used with AWR2944 to stream the raw data over Ethernet. On AWR2944 the demo is running. After 75 s DCA1000EVM freezes, not sending any data. AWR2944 is still…
    • Answered

  • RE: AWR2944EVM: Cannot find magic word in AWR2944EVM's TLV output

    Resolved
    Hi Mark, Baudrate of data port is configured to be 3125000 in AWR2944 demo. So, you should set the baudrate to be 3125000 in the visualizer. In the demo visualizer, you need to update the baudrate to 3125000. You can refer to section 3.4.2. mmWave…

  • AWR2944EVM: Using chirp staggering to increase range and doppler

    Part Number: AWR2944EVM Other Parts Discussed in Thread: AWR2944 Hi, can the PRF staggering method of increase range and doppler be used on this/any device by replacing the PRFs with chirps? Thanks Sam

Didn't find what you are looking for? Post a new question.