Ananya K C said: Could you try flashing the sbl_qspi image. Are you getting the same error?
I tried all the following experiments and still see the same error, note that I did power recycle before performing each of the following flashes:
In Boot…
Hi Ritu,
Refer to section 3.3.2. CCS development mode of "C:\ti\mmwave_mcuplus_sdk_04_07_02_01\mmwave_mcuplus_sdk_04_07_02_01\docs\mmwave_mcuplus_sdk_user_guide.pdf" to run the OOB demo using CCS.
Ritu Jadhav said: and right clicked then selected…
Part Number: AWR2944EVM Other Parts Discussed in Thread: UNIFLASH Tool/software: Recently, I started transitioning from data post-processing to working with real-time, on-board firmware using the SDK for the AWR2944EVM. However, I'm currently facing some…
Part Number: AWR2944EVM Tool/software: Hi,
I want to optimize configuration for the following OOB setup:
* Max unambiguous range >110m
* Range resolution <0.7m
* Max speed < 30 km/h
* Speed res - not critical
* Angle res - not critical
…
Part Number: AWR2944EVM Hello TI Support,
I am evaluating the AWR2944EVM antenna design for a 76–81 GHz automotive radar application. I imported the TI ODB++ PCB files into Ansys HFSS 3D Layout 2024 R1.1, but my simulation results do not fully match…
Hi Nishchay,
These are the results obtained after implementing the setup using the `2055.sbl_qspi.release.tiimage` and `2055.sbl_uart_uniflash.release.tiimage` files specified in `flash_awr2944.cfg`. It appears that a transmission error occurs at block…
Hi Stephen,
Can you try flashing with another HW setup if it is available? Also, can you put the device in SOP5 modes and send a snippet of your tera term logs? similarly, can you put it in SOP4 mode and share the tera term logs? I hope that you have…
Part Number: AWR2944EVM Other Parts Discussed in Thread: AWR2944 Hello TI engineers,
I am working on the AWR2944EVM power supply, as I need to operate the device off-grid. I have decided to use a 6S Li-Polymer battery as the source. Since the EVM requires…
Hello Gabriel,
Thank you for your inputs. We were unable to set up the debug environment for HECR and have raised a separate query regarding the same.
As per your suggestion, we made the necessary changes in the HECR demo and can now see some point…
Part Number: AWR2944EVM Other Parts Discussed in Thread: AWR2944 Hi TI Team,
I am currently working on the AWR2944 Ethernet OOB Demo and have successfully flashed and run the demo with the following setup:
SDK: mmwave_mcuplus_sdk_04_07_01_04 Flashed…
