Other Parts Discussed in Thread: BQ24020 Hi All,
I am using BQ24020 charger IC for charging 150mAh battery through USB.
I am unsure about setting the resistor value for ISET1 pin. The datasheet says that the ISET1 resistor is used to set taper and…
Other Parts Discussed in Thread: BQ24020 , TPS63020 Hi,
Q1: Can the PS/SYNC pin (power safe mode) be active for good?
Q2: Should the VINA pin be also connected to VIN or is it internal connected?
Q3: from page 12 from the PDF file it seems…
The bq24020 was designed to be powered from a source with low output impedance like USB port or wall adapter. A solar panel is a high impedance source and so can be collapsed if too much current is pulled from it. That said, pre-charge current is very…
Hi,
Please help me to solve this problem,
I am using BQ24020 charger IC to charge 120mAh Li-ion battery. I set the charge current to around 100mA. Attached is the circuit schematic. The problem I am facing is STAT1 and STAT2 signals indicate that…
Hi John,
Did you look at the bq246xx family?
I attached battery chargers catalog also, you can find a lot of info on our website as well
http://focus.ti.com/paramsearch/docs/parametricsearch.tsp?family=analog&familyId=394&uiTemplateId…
Hi Xellcom,
I was looking at bq24079. It is USB 1 Cell lithium Ion battery charger.
I attached our battery chargers catalog for your own research for the best part for your system.
Thanks!
Tahar
Hi Cleidson,
Please take a look at the attached TI battery chargers catalog that we offer, I do not have enough info about your system to specify the needed charger.
Thanks
Tahar
