Hi Jez,
Thanks for using BQ24192 in your new design. I also recommend looking at the BQ2419x evaluation module for additional schematic help as well as an example layout. For your questions:
OTG and PSEL: To change the adapter current limit you…
Part Number: BQ24192 Other Parts Discussed in Thread: BQ27510 Hello,
I've started a design with the BQ24192 charger and the BQ27531 fuel gauge and realized that using a BGA part is going to add significant costs to my pcb. I have a lot of space and…
Part Number: BQ24192 Dear TI experts:
There is a question about BQ24192~ As the datasheet shows, the BQ24192 supports the following functions (Power Path).However, at present, when the battery is over-discharged, the power supply through the external…
Hello Darshan,
From your schematic, I see you only have 0.1uF on PMID. Please note that the capacitance at PMID is very critical since PMID is the actual input to the switching converter, so you want to make sure enough capacitance is there to handle…
Part Number: BQ25890
When the input source is over-loaded, it is either from the current exceeding the IINDPM (Input Current Limit) or from the voltage dropping below VINDPM (Input Voltage Limit).
For the current to cause the input source to be…
Part Number: BQ24192 Hi, Ti engineers,
I'm using the BQ27531 fuel gauge + bq24192 Charge application.
Question : how to reduce power comsumption of the charge application when the battery has been fully charged and no load was connected to SYS of…
Other Parts Discussed in Thread: BQ24192 , CC2640 , BQ27531EVM , BQ27531-G1 In my current project we are using Li-Ion Battery Pack 3.7V @19800 mAH with BQ24192 Battery Charger IC.
For charging this Battery Pack we have two Options:
Through USB …
