Part Number: BQ24266
Hi,
Sorry for mentioning alternate part no.
I am using BQ24266 as external charging circuit for my SC20 based custom board.
Is driver code is available for integrating it in android.
Regards,
Richu
Part Number: BQ24266 Other Parts Discussed in Thread: BQ25606 , , BQ24133 , BQ25886 Hi team,
My customer found that BQ25606 is a recommended part for BQ24266 replacement for TI.com. Does TI have any other device to promote? My customer would like to learn…
Part Number: BQ25606 Other Parts Discussed in Thread: BQ24266 , BQ25616 , Hi,
BQ25606 is recommended as replacement of BQ24266.
Could you share the datasheet of BQ24266?
Best Regards,
Kuramochi
Part Number: BQ25606 Other Parts Discussed in Thread: BQ24266 Hi,
BQ25606 is recommended as replacement of BQ24266.
https://e2e.ti.com/support/power-management/f/196/t/798968
Does anyone have comparison table of these devices?
Best Regards,
Kuramochi …
Part Number: BQ24266 Other Parts Discussed in Thread: BQ25606 We implement BQ24266 at our new product and unfortunately the charger is not working
The issue describes below:
when the USB2 (in fact I am using Power Source 5VDC @ 3A ) and the battery 1…
Part Number: BQ24266 Hello,
Could you please review my customer design? He says CHG does not disable when Vhot<1.4V (Vdrv * 0.3).
He connects LED to /CHG pin to check that.
<Parts used>
THermistor
0℃:Rcold=27.22kΩ/60℃:Rhot=3.01 kΩ…
Part Number: BQ24266 Hi, team.
When VIN slowly decreases, CHG becomes High-Z at about 4.3 V regardless of the BAT voltage. Why? I think that it is not Sleep Mode because there is enough potential difference between VIN and BAT. At the time of VIN-DPM, will…
Part Number: BQ24266 Other Parts Discussed in Thread: BQ25896 , BQ25606 , BQ25600 , BQ24261 Good morning
I need to make a charger that charge 10 or more batteries individually.
And they do not use a microcontroller
I am in doubt between models, BQ25600…
Part Number: BQ24266 Other Parts Discussed in Thread: BQ25606 We have seen intermittent failures with the bq24266 not charging the battery, and the system fails. The input voltage should be utilized when the battery level gets low, but we are seeing the…