Part Number: LM7310 I was recommended to make a new post regarding this, so here it is.
In the schematic posted here: https://e2e.ti.com/support/power-management/f/power-management-forum/982290/bq24600-battery-charging-and-power-gate-using-lp73100rpw…
there are stand alone and host controlled; also chargers with power path selectors and just charger.
Since you said you may want to operate while charging consider a power path.
Standalone with power path: bq24133 or bq24170 or bq24610
Standalone…
Other Parts Discussed in Thread: BQ24650 , BQ24630 , BQ24640 , BQ24610 , BQ24620 , BQ24600 , BQ24616 , BQ24617 Is there a document that summarizes the differences between the bqStroller battery chargers ICs. These ICs are the bq24600, bq24610, bq24616…
Hi Mike.
I have changed the MOSFETs of BQ24650, they are smaller than the previous.
The 10 Ohms gate resistors, they have a defined part number, they are "pulse withstanding" type, part number ESR03EZPF10R0 of Rohm Semiconductor. I did not mention…
Part Number: TIDA-00982
Hi, we are trying to build a 2S battery charger for a nano non-military drone. Taking the TIDA-00982 as a reference.
For adapting to our requirements:
1. We have merged battery in and balancing and protection port into a…
The attached file has bq24610 (Li-ion battery) and bq24630 (LiFePO4 battery) charger comparison. From it, you can find the LiFePO4 charger differences.
bq24610 vs bq24630.pdf
I got the solution....I am getting vout 18 V.......Soft start is also happening.....Still one issue...
After the ucc28600 adapter portion i used the IC BQ24600 to charge the battery(type Li-ion) with 16.8V in same PCB.
It is charging the Battery with…
Hello Kuber, Thank you for the reply.
Here are a few last comments:
You have a 4S, 4 series, LiPo pack.
Maximum charge voltage per cell is ~4.2V, Minimum is ~3V.
So the pack voltage range is 16.8-12V.
Charging from your 24V source would…
bq24600/20/40EVM uses /PG pin signal to drive external power path circuit. Please copy that circuit to do the power path function.
bq24650 has similar pinout, you can put bq24650 IC to a bq24600/20/40EVM
