Hi Shafeeq,
For schematics you can look at this FAQ post: https://e2e.ti.com/support/power-management/f/196/t/791790
For layout you can access the EVM gerber files here: http://www.ti.com/tool/bq24610evm under the software links
And for layout resources…
Hi Jimmy,
Thank you for the clarification. The typical output capacitance for 6A charge current would be 30uF (your design currently has 20uF).
Also, the control stage and the power stage should be routed separately. At each layer, the signal ground…
Other Parts Discussed in Thread: BQ24610EVM , BQ24610 Hi,
We are trying to implement a battery charger using BQ24610EVM. We'vec tested two BQ24610 EVM.
The first one was working fine, but isn't anymore. It seems to be somehow stuck in sleep-mode…
Part Number: BQ24610
HI, we are currently have a product that is BQ24610RGER battery charger ,HIDRV & LODRV was not switched and also STAT1,STAT2 pin was always high .
Other Parts Discussed in Thread: BQ24610EVM
Hi,
Please send the gerber files of BQ24610EVM & BQ24610EVM-HV, my customer would like to use it for the layout.
Best regards
Shlomi
Other Parts Discussed in Thread: BQ24610 , BQ24610EVM Hello,
I have a custom circuit board which includes a bq24610 to charge a 2-cell Li-Ion battery from at 12V source. The circuit is taken from the datasheet with the following customizations.
ISET1…
Part Number: BQ24610 Other Parts Discussed in Thread: BQ24617 , BQ24616 , , BQ24618 , BQ24630
Please see the below document for the layout guidelines and example for the BQ24610, BQ24616, BQ24617, BQ24618, and BQ24630.
Layout Guidelines and Example…
Hi
According to the bq24610EVM-603 7-Cell-Li-Ion Battery Charger file with BQ24610RGE+ UCC27201 , I design the circuit 12V/20A MPPT controller with BQ24650 + UCC27201 . Do you think the project is ok?
Best regards
Hi
According to the bq24610EVM-603 7-Cell-Li-Ion Battery Charger file with BQ24610RGE+UCC27201, I design the circuit 12V/20A MPPT controller with BQ24650+UCC27201. Do you think the project is ok?
Best regards
