Part Number: BQ25180 Other Parts Discussed in Thread: BQ25170
I'd like to tie MCU reset pin and BQ25170's MR pin. When short click for MCU reset, Hardware reset for long click. (like above schematic)
I think NTC monitoring function should be disabled…
Part Number: BQ2057C Other Parts Discussed in Thread: BQ2057 , BQ25170
Tool/software:
Hello everyone, I have a problem with the BQ2057SN not BQ2057C. I am using the IC on my board to charge a LiPo battery. One charging cycle ran without any problems…
Part Number: BQ51050B Other Parts Discussed in Thread: BQ25170 , BQ25100 , BQ51003 , BQ25180 , BQ25120 , BQ25155 , TIDA-00318 Tool/software: Hi,
Q1. As far as TI's lineup is concerned, the only charger IC that supports wireless charging is the bq5105x…
Part Number: BQ24040 Other Parts Discussed in Thread: BQ25170
I have this square wave with 100ms period 50% duty cycle on ISET pin.
ISET has only a 1.8k resistor connected.
ISET2 is stable low (10k pulldown + powered down MCU giving 200mV on…
Part Number: BQ25176J Other Parts Discussed in Thread: BQ25186 , BQ25170 Tool/software: Ref.: BQ25176J and bi-directional load switch
Can the LEDs for PG and STAT to IN, if the max Vin is less than 6V?
What is the state of PG and STAT in the absence…
Part Number: BQ24075 Other Parts Discussed in Thread: BQ25170 , BQ25185 , BQ25710 , BQ25790 , BQ25180 Hi Team
do we have any batter charger IC for coin battery which can be conducted in shipping mode?
below is coin battery spec.
'
BRs…
Part Number: BQ24052 Other Parts Discussed in Thread: BQ24050 , , BQ25170 , BQ25171-Q1 , BQ24040 Specs would be single cell, 1A charge current, li-polymer chemistry, linear topology, also needs 5V Vin capability from USB port.
Also what's the difference…
Part Number: BQ2982 Other Parts Discussed in Thread: BQ21040 , BQ25170 Hi team,
Our customer designed below battery management system using bq298216, CSD87501 and bq21040.
And they are evaluating this system in low battery voltage(VBAT) condition…
Part Number: LM3658 Other Parts Discussed in Thread: BQ25170 Hi
The customer design with LM3658, when the temperature reaches a certain value, the voltage of TS exceeds the threshold range, and the LM3658 turns off the charging process. At this time…
Part Number: BQ21080 Other Parts Discussed in Thread: BQ25170 The simplified schematic of the BQ21080 implies that battery voltage at the BAT pin will flow in reverse to the IN pin due to forward biasing the MOSFET diodes.
My question is if this is…
