Part Number: BQ27426EVM-738 Other Parts Discussed in Thread: BQSTUDIO , GPCCHEM Hi,
Currently i'm using BQ27426EVM to get chem id, i find some issues in the log file, generate by the bqstudio.
In the image, in the row marked yellow, the two columns…
Hi,
Andy, that's not entirely true.
This thread is about: Generating an error [VOK: Not Clear] during learning cycle regarding BQ27426EVM-738.
The other thread is about a problem from GPCChem, that was occuring during the characterisation of the battery…
Part Number: BQ27426EVM-738 Hi all,
I've got an error during the gpc report: Accuracy Error: Deviation is so high that it is most likely due to anomaly in the data.
What is the problem?
What will be the consequence conerning the suggested chem id…
Part Number: BQ27426EVM-738 Other Parts Discussed in Thread: BQ27426 , EV2400 , BQSTUDIO I have copied the code from Appendix A of the SLUA801 "Gauge Communication" document. The host mCU is an ARM Cortex-M4 (nRF52832). In general the code appears to be…
Part Number: BQ27426EVM-738 Other Parts Discussed in Thread: BQ27426 , BQ25122 , GPCCHEM I'm currently trying to evaluate the Fuel Gauge BQ27426 using the dedicated EVM-Board.
To test the board I'm using a ASR00008 Battery (available from mouser, digikey…
Part Number: BQ27426EVM-738 Other Parts Discussed in Thread: BQ27426 Hi everyone,
My customer works with BQ27426EVM-738 and faced with a problem.
They are not able to go into device configuration mode. Bit FLAG_CFGUPMODE (1<<4) is not set in CONTROL_…
Part Number: BQ27426EVM-738 Other Parts Discussed in Thread: EV2400 , BQSTUDIO Hi,
I am trying to connect my BQ27426EVM to bqStudio for testing but when I connected the EVM to a EV2400 and my computer I got the following error:
I'm confused as to how the…
Part Number: BQ27426EVM-738 Other Parts Discussed in Thread: BQ27426 , BQSTUDIO Is it possible to have the Gerber files of the BQ27426EVM board? The layout is shown in the data sheet, SLUBBE1, but the resolution is too crude to see exactly what is going…
Hello Kailun,
When the gauge is in sleep mode the registers get updated only once every 20 seconds, whereas when the gauge is in normal mode the registers get updated every 1 second. Please refer to sections 2.4.4 NORMAL Mode and 2.4.5 SLEEP Mode in …
Part Number: BQ27426EVM-738 Other Parts Discussed in Thread: BQSTUDIO , BQ27426 , EV2400 Hello,
I evaluating both the BQ27426 and BQ27411 modes with the EV2400. However, often times when I launch the bqStudio software, I get the Target Selection Wizard…