Other Parts Discussed in Thread: BQ27500 Hi
I have a question on operating BQ27500 from MSP430.
I am able to communicate to it over I2C and able to perform read/write operations with it.
My question is: are BATL_ENABLE/BATL_DISABLE control() sub…
Other Parts Discussed in Thread: BQ27500-V130 , BQ27500-V100
We have an unfortunate situation where a number of boards with the newer bq27500-V130 chip were programmed with a DFI file for the bq27500-V100 (running v1.08 of the firmware).
We desperately…
Other Parts Discussed in Thread: BQ27500 , BQEVSW Dear Sir,
I tried to use BQ27500/1 EVM and bqEASY tool to make golden image.
However, an error happened when writing configuration into data flash.
Here is the screen shut.
It confused me that…
Hello
I've just tried following these instructions to change the firmware version on the bq27500 device on the HPA291 rev B board that is supplied by TI with the EV2300 module. The firmware version is 1.08 (as supplied) and I wish to change it to 1…
Other Parts Discussed in Thread: BQ27500 , BQ27501 Hello,
I have a few regarding hte BQ27500 upgrade procedure.Since it is very sensitive, meaning that I can destriy the chip due to incorrect operation i am doing things by parts.
I have BQ27500…
Other Parts Discussed in Thread: BQ27500 I think I loaded the wrong .dfi to my evm. I loaded a v1.30 dfi, but the board may have a 1.08 part installed. Now I can see that the eV2300 is sending I2C commands, but the EVM board is no longer responding. Is…
Dear all,
Even though this topic is considered answered I just want to add on that this applies also for regional settings like Norwegian. I have been informed by TI that the bqEVSW does not support regional settings other than English.
I think that…
Hello!
I have several golden image DFI files to use with firmware 1.20 which should be updated to 1.30. I thought with the bq evaluation software it is possible to:
#1 read 1.20 DFI file
#2 export to gg file
#3 modify version with text editor…
Other Parts Discussed in Thread: BQ27500 , BQ27510-G2 , BQ27500-V130 Hi all,
I was looking at using a bq27500 gas gauge and I wanted to know if there are any issues with charging an attached battery whilst the gas gauge is in the HIBERNATE power mode…
Other Parts Discussed in Thread: BQ27500-V120 , BQ27500 I am having a problem with a batch coming off from production. We have (and have been using) BQ27500-V120 parts that we then program with v1.30 before loading our *.dfi image.
Before starting…
