Hello Nick Richards
Thank you for your reply。
I have a new question,We use bq28z610 for the coulometer and bq25792 for the charge management chip
Adapter plugged in, green light, keep charging the battery. When the green light goes out, I read the 0x2c…
Part Number: BQ28Z610 Other Parts Discussed in Thread: BQ25792 , GPCRB
Hello,
We use it on the battery protection board and during testing, it was found that when the temperature drops to a certain value (such as -20 ° C),
the battery capacity…
Part Number: BQ28Z610 Other Parts Discussed in Thread: BQSTUDIO , EV2400 Dear expert,
After long storage, customer found the battery voltage drops to ~2.7V. But the relative state of charge they read from EV2400 and BQStudio is still about 100%. The SOC…
Part Number: BQ28Z610-R1 Other Parts Discussed in Thread: EV2400 , BQ28Z610 Hi everyone.
I have a design use BQ28Z610-R1 as attached file. I also use ESD5581N2T5G to protect I/O pin when I connect them with external peripheral device.
I have tested this PCBA…
Part Number: BQ28Z610-R1 Hi TI team
I have a question regarding the LIFETIME record.
My customer, in a normal storage environment, has the LIFETIME record showing a low temperature of -74 degrees.
I've checked the NTC and found no issues.
Can you…
Part Number: BQ28Z610 Other Parts Discussed in Thread: BQSTUDIO Hi Team,
The customer wants to read the voltage of single cells of CEEL1 and CEEL2. It is not marked in the data sheet. Which address is it?
Regards,
Annie
Part Number: BQ28Z610 Hi Team,
I have a customer who uses LiFePO4 / LFP (Lithium Iron Phosphate) which have:
* One of the highest Life Cycles of existing Lithium batteries chemistries (which increases the Charge / Discharge Cycles).
* One of the highest…
Part Number: BQ28Z610-DEVICE-FW Other Parts Discussed in Thread: BQ28Z610 , BQMTESTER , , BQPRODUCTION , BQSTUDIO Hi team,
I have a customer with the below issue using the BQ28Z610 and the software he's been advised to use. Let me know your thoughts and thanks…