Part Number: BQ3050 Other Parts Discussed in Thread: GPCCEDV Hello Team,
Looking solution for following queries :
1. Battery Pack RSOC was 10% before Reset , it becomes 0 after reset...why ? I changed Battery Mode register and to reflect its value…
Part Number: BQ3050 Hello Team,
Here is my Battery (4S) Design requirement :
Max. Pack Charge Voltage : 16.4 ( Cell Voltage = 4100mV Max.) , EDV Fix method.
Max. Pack Discharge Voltage : 12.8 ( Cell Voltage = 3200mV max ) after that DSG MOSFET must…
Part Number: BQ3050 Other Parts Discussed in Thread: GPCCEDV , , GPCCHEM , , BQSTUDIO , BQEVSW
Hello Team,
First , I am Very new to BMS World.
Not Sure whether to use GPCCEDV Or not.
Doc : https://www.ti.com/lit/ug/sluub45b/sluub45b.pdf not Helping…
Part Number: BQ3050 Other Parts Discussed in Thread: BQEVSW
Hello Team,
1. Dataflash , Calibration memory and Firmware memories are all have different space / segment inside BQ3050 ?
2. Does senc file contains all above three data ?
3. I am using…
Part Number: BQ3050 Hello Team,
I am working on a charger where i need to charge BQ3050 based battery simultaneously. In my case it is 4 nos.
On SMbus all Battery have same Device address , I think it is not changeable.
Host MCU is Common here to…
Part Number: BQ3050 Other Parts Discussed in Thread: BQEVSW Hello Team,
I have Assembled new board using BQ3050.
Cells are connected in (2p4s) series. Calibration and .senc file uploaded.
Now, In Rest mode battery current shows between 4ma to 7A…
Part Number: BQ3050 Other Parts Discussed in Thread: BQEVSW , GPCCEDV
Hello Team,
I am looking for .senc file which is configured for 2p4S Li-ion batteries. TI online page has .senc file for 3S.
attached is the SBS read parameter from the BQ3050…
Part Number: BQ3050 Other Parts Discussed in Thread: BQ4050 , BQ40Z50-R2 Hi,
we use bq3050 with Murata US18650VTC4 Cells in 3S1P pack.
For the balancing we only use the internal version that balances mupltiple cells at the same time, not with additional…
Part Number: BQ3050 Hi,
Could some help me with the following,
I received a couple of battery packs that use the BQ3050 IC with the AFE_C flag activated along with the VSHUT & CUV PF.
Anyone here can guide me to understand under what condition this…
Part Number: BQ3050 Hi BMS team,
Our customer has used bq3050 for their battery pack and their battery pack was returned from market this time. They tried to communicate bq3050 then they found that the gaugte enter BootROM mode. As a premise, the host…
