Hi, Ben
Yes, you can import data flash directly to NVM while device is operating. Once complete, you will need to reset device. You can see more detail in the Configuration Programming of UCD devices document.
Section 4.1, page 4, "Export using…
Hi
No, the pdf is not designed for customer to program the configuration.
Please follow section 9.5 of the below pdf
6232.Configuration Programming of UCD Devices.pdf
Regards
Yihe
Hi
Could you connect the fusion GUI and see what kind of status is reported?
You can refer this document to program.
Do you get any issue on the VID?
0640.Configuration Programming of UCD Devices.pdf
Regards
Yihe
Hi
Please see my answers below.
1. UCD90160A has built-in flash therefore external flash is not need.
2. you can configure GPIOs to various function and device will set the output based on the configuration .Please refer the GUI guide to see what…
Hello
Yes, You can export the data from a working device. Here are the videos to follow how to export.
https://training.ti.com/fusion-power-designer-import-and-export-data-flash-hex-files?context=1136655-1139495-1136589
https://training.ti.com/fusion…
Hello
Please see my answer below.
A. yes. PMBUS_COMMAND(0xFD) is used to read the device id which include the firmware revision released by TI
B.1 Please refer section 9.5 or 9.6 of the attachment for how to program the configuration data into the…
Hello
All the flashing is done by i2c/pmbus communication. You can follow section 9.5 or 9.6 to make own tool to program under Linux.
2337.Configuration Programming of UCD Devices.pdf
Regards
Yihe
