Part Number: BUF634 Hello Team ,
Can you please help me understand what are the key care about which i need to look into while replacing BUF634 with the newer BUF634A ?
Part Number: BUF634 Hi, How should I consider the temperature characteristics of gain in open loop? Could you let me know if there is a way to estimate. Best regards, Yuto Sakai
Part Number: BUF634 I see the BUF634A available as SOIC, (VSON and HSOIC in preview) per the datasheet. Is there an 8 pin DIP package in the works. If not is there an equivalent buffer recommended for new designs?
Part Number: BUF634 Other Parts Discussed in Thread: TINA-TI , OPA2810 , Hello,
I am using BUF634 to derive a mid-rail virtual ground in a 24V single supply system, thus creating a +12V and -12V dual supply.
I have a constant load of 50mA that draws its…
Hi,
1. Section 9.4.1.3 of the datasheet, Table 6, has recommended resistor values for each gain setting. These resistor values are selected to try to achieve the best noise performance, harmonic distortion, and for any noise gain peaking. All device…
Part Number: BUF634 Other Parts Discussed in Thread: OPA569 Hi Team,
My customer plan to use a buffer to drive high current from a amplify.
Below is the basic requirement:
1.The output current better to range from 0~300mA. And 0~250mA is acceptable.
2…
Part Number: BUF634 Other Parts Discussed in Thread: LME49600 , Hello,
I am looking for a buffer (Analog) with the following requirements:
1) Input voltage range: 0V to 0.9V
2) Fq: ~100MHz to 200MHz
3) Iq, Noise: We don't really care about it
4) VDD…
Part Number: BUF634 I bought some SOP type BUF634s from a shop recently, but they don't work as they are and I am afraid that they are fakes. Then, I get your help to check if they are genuine parts or not. Since they don't work, I check the conductivity…
Part Number: LMH6321 Other Parts Discussed in Thread: BUF634 , , TINA-TI , OPA593 , OPA593EVM Hi,
does TI offer a full simulation model of the LMH6321 chip? The downloadable SPICE files from TI explicitly state "* MODEL DOES NOT HAVE PROGRAMMABLE CURRENT…