Part Number: CC1120EM-868-915-RD Other Parts Discussed in Thread: CC1120 Does cc1120 support interleaving and spread spectrum？If CC1120 confirms that these functions are supported, which registers are involved in configuring these functions？
The sub-1 PHYs supported can be found in smartrf studio:
For sub1 PHY for 802.15.4, you can also refer to the ti154stack examples:
(in the project's .syscfg file: "RF STACKS" --> "TI 15.4 STACK" --> Radio)
The GFSK PHY…
Part Number: CC1120EM-868-915-RD Other Parts Discussed in Thread: CC1120
Hi,
I have two CC1120 modules:
fisrt one identified in smartRF studio with rev # 2.1
the second identified in smartRF studio with rev # 2.3 and it has addtional note on its sticker…
Part Number: CC1120EM-868-915-RD Hi. I am using cadstar design viewer to look at the design files for the EVM. I am interested in the layout for reference/ But for the .pcb file, I am only able to view the placement. I am not able to see any layers or…
Part Number: CC1120EM-868-915-RD Other Parts Discussed in Thread: CC1120 Is there any effect in functionality with Perl scripts for module that is FCC approved compared to those who did not FCC approved ?
Part Number: CC1120EM-420-470-RD Other Parts Discussed in Thread: CC1020 , CC1120 We want to try packet communication between cc1120 and cc1020. First of all, the packet format for cc1020 is unknown. I understand that in order to communicate with the packet…
Part Number: CC1120EM-868-915-RD Other Parts Discussed in Thread: CC1120 hey,
Want to configure Evaluation module CC1120 using smartRF studio 7 but i am using another devlopement board is it possible to configure cc1120 with RFstudio 7?
In devloper's module…
Part Number: CC1120EM-420-470-RD Dear Sir,
I have two CC1120EM-420-470 (DK) daughter cards, and now I have designed a motherboard to connect it.
But i try to find the CC1120EM-420-470 (DK) daughter card information or documents, they are not show the mechanical…
Part Number: CC1120EM-169-RD Other Parts Discussed in Thread: WMBUS , CC1120 , CC1350 , CC1310 HI All,
CC1120 supports 169Mhz RF brand (N-Mode Wireless mBUS).
After downloading "Wireless M-Bus Protocol Software" in https://www.ti.com/tool/WMBUS , and…
Part Number: CC1120EM-420-470-RD
I would like to porting driver to STM32 and found that will block on GPIO2 no response after STX command.
I set "CC112X_SETTLING_CFG = 0x00B" and my partversion is 0x23 no run manual calibration.
my initial…
