Part Number: CC1312R Other Parts Discussed in Thread: CC1310 Hi there! We are having the CC1310 and CC1312 in use utilising the 15.4 stack. Is in mass production and our application is a sensor2gateway IoT solution. Currently working on 50k speed mode…
Someone that is experts on comparators should answer this one. Suggest reposting this question in Other Analog & Touch. forum
The filter should be placed between amplifier and antenna to suppress out of band interference. Following this strategy out…
Other Parts Discussed in Thread: CC1101 I followed the CC1101-CC1190 reference design outlined in AN094 to layout a custom radio PCB. The layout was copied and the component values used are the same as listed in the parts list. The design in AN094 is…
Thanks Jim!
One of the constraints on the system is that it should be small in size, so I was considering a chip antenna... When it comes to SimpliciTI, I am sure it will work, as I am planning to transmit <50 bytes on a very low duty cycle (i.e. once…
Other Parts Discussed in Thread: CC1101 , CC1120 , CC1190 , TEST2 Hi
i have an existing product using the CC1101 transciever which now needs to work with the CC1120 with the CC1190 range extender on it also.
if I use RF studio to set up the 1120 with…
Thanks, that is very informative. One thing that is missing is any description of expected real-world range. Either line of sight range or indoor range, would be extremely helpful for a document about antennas & range. Theory is great but what really…
Other Parts Discussed in Thread: CC1101 , CC1190 , CC1101-Q1 Good Afternoon from europe Guys! I`m having a problem with the CC1101-Q1. I`m following the CC1101 - CC1190 869.MHz reference design. The carrier-frequency is every time on 830.MHz. If i change…
Other Parts Discussed in Thread: CC1101 , CC1020 , CC1190 Hi to everyone,
I am going to use CC1101 for a 869 Mhz application with frequency hopping. Due to the recommendation for this band, the frequency spectrum needs to be devided in 10 (25 Khz)…
Modulation bandwidth is measured with max hold, peak detector on the spectrum analyzer. Phase noise is measured using an averaging detector. The difference accounts for a 10 dB difference (or more?).
Please let me know the system parameters such as…
