Would also recommend section 4.3 of this document. Describes the same HA application (albeit for a ZAP-ZNP operational model). This document is available from the MSP430-ZAP-1.0.3 installer from www.ti.com/z-stack
swrc173.zip (57.0MB) - contains ZStack…
Other Parts Discussed in Thread: CC2430 , CC2530 hi all
i wanted know whether the source code of over the air programming for cc2530 can be used for cc2430 ??
is it possible in anyway to adopt whatever explained in the document "Over Air Download…
Hi again,
You are correct that it's different on the CC254x and CC253x devices, since for these chips the flash lock and debug lock bits are located in the last page of the main flash, as you said.
For these chips it should be possible to embed the…
Other Parts Discussed in Thread: Z-STACK dear ti
when we enable security in Residential mode in Home Autom ation profile.
And As router is switched on, its request come to security manager in coordinator side to allow or reject this device.
Function…
Hi all,
I have a ZED connected to a ZC, usually to send data from ZED to ZC I use AF_DataRequest and to send data from ZC to ZED I use zcl_SendWrite.
Evriting seems to work correctly: deveces communicates, if I switch off and on again one of them…
Other Parts Discussed in Thread: CC2530 I am using CC2530 radio chip. I have two boards, one acting as master & other as slave.
Master is configured to transmit a radio packet every 990 msec. Slave sleeps for 990 msec & then wakes up .. receives the…
Other Parts Discussed in Thread: CC2530 , CC2590 , Z-STACK , CC2591 , CC2592 Hi Guys,
I´m working to configure Ebyte Module E18-MS1PA2 CC2530 (w/ PA and LNA inside), but I didn´t have success to setting it correctly. According the Ebyte datasheet is…
Other Parts Discussed in Thread: CC2530 I am trying to find the "recommended" way to protect the code on a CC253x device. The target devices are both 32K and 128K versions depending on the application. I would like a generic way to generate a hex output…
Hi Luke,
I think I will recall my earlier answer. While the RF430CL331H ds (which is a PICC) does not explain how modulation depth is define, I find the TRF7970A (a PCD) transceiver to have the below notes about the depth.
6.15.3.2.8 Modulator and…
1) Dear Yikai, I think i have incorrect document kindly provide correct document , in the document which I have that does not contain these three categories 7206.4606.Building a ZigBee Network Based on Many-to-One Routing of 400%2b Nodes.pdf
2) Dear…
