Search tips
Showing 2,266 results View by: Thread Post Sort by
    Answered

  • Re: SmartRF04 update for second generation SoC's

    Resolved
    Hi, Yes, this is possible. You will need SmartRF04EB firmware revision 0040 or newer , as described in this thread . I will recommend to use SmartRF Flash Programmer to check the current version of the SmartRF04EB firmware, and upgrade it if necessary…

  • TI's CC2530 Zigbee Serial Application

    Other Parts Discussed in Thread: CC2530 Hi, I'm working on the Serial application provided in the stack of TI I observed that the sample application has ZCL implemented and the serial application doesnt have ZCL implemented So how can I use ZCL…

  • Re: Connecting CC2530 to iDigi ConnectPortX2

    I can't answer the certification part, but a unique EUI ("IEEE address") of your CC253x device has been preprogrammed into the chip's flash information page. The chip's flash information page is 2 kB read-only memory, and is memory-mapped to start at…

  • ZNP

    Hi Fried, I doesn't get ZDO_STATE_CHANGE_IND command with a status of DEV_ZB_COORD, DEV_ROUTER, or DEV_END_DEVICE .

  • AN118 -- Programming of CC253x/4x devices is available (swra410)

    Other Parts Discussed in Thread: CC2530 AN118 -- Programming of CC253x/4x devices Application note AN118 demonstrates how to use the CC debug interface to perform various flash related tasks on a CC253x / CC254x System-on-Chip (SoC). The application note…
    • Answered

  • Re: Drivers CC1111

    Resolved
    Hi Tim, The USB example software mentioned above (swrc088) contains examples for two different classes: the CDC class and the HID class. If you try/use the HID USB class, you will not require to install any particular driver on Windows XP/7. Windows…
    • Answered

  • Neighbors table problem

    Resolved
    Other Parts Discussed in Thread: Z-STACK I was testing z-stack and I got a problem. I got 30 zigbee router and I started a Zigbee network with a coordinator. I was testing my routers like that: turn it on, wait for it join the network and turn it off…
    • Resolved
    • Answered

  • RE: what is the Logical Channel in pairing table?

    Resolved
    As I know, ZRC1.1 supports five channels (11, 15, 20, 25, 26). Could it cause the failure of communicating between the remote control unit client (CC2531USB) and the target Set-top ZRC 1.1 complied?
    • Answered

  • zigbee protocol for CC2530DK

    Resolved
    Other Parts Discussed in Thread: CC2530 respected sir I am working on project for wirless TX & Rx and using zigbee CC2530.Can u guid me how to write Protocol for it in IAR .please send me sample code on ag.india@hotmail.com
    • Resolved

  • New Z-Stack with no preprocessors and output option on project

    Other Parts Discussed in Thread: CC2530 , Z-STACK Hi, don't know if the problem happened only with me, but the new version 1.4.0 of Z-Stack for MSP5438, MSP2618 and CC2530 came with no projects options.

Didn't find what you are looking for? Post a new question.