Part Number: TPS61199 Hi，
When using TPS61199, I found that the actual current did not match the set ISET current, the difference was 5 times.
If the ISET resistance is set to 50mA, the single-string LED current measured with a multimeter is only…
Hi Peter,
If it can help, here the link to the file provided for the transistor I've talk about: e2e.ti.com/cfs-file/__key/communityserver-discussions-components-files/196/CSD19532Q5B-Qual-Summary.pdf_2E00_
This was enough for me and I look for…
Part Number: DRV8353R Other Parts Discussed in Thread: , DRV8353 Tool/software: Hi...
One of my cusotmer is evalauting DRV8353RS-EVM & facing issue with the EVM.
They are using a 24V BLDC motor with output power of 90 to 900W. At present In their…
Hello Mamadou
The signal on GATE_OUT(HO pin) should reflect on the HI signal as I understand. but I don't see the correct signal on the HO pin. Please see the attached plot in the attachment.
Also schematic attached:
0410.SCHEMATIC1 _ PAGE1.pdf…
Part Number: TIDA-01167 Other Parts Discussed in Thread: LMR16030 , BQ25606 Hi,
We are going designing a board with various different sensors and MCUs for automotive application. We have selection LMR16030 for switching regulator with 3A output current…
Hi Nakai san,
Thanks for continuing to promote TI FETs at your customer. The switching times published in the FET datasheets are of limited usefulness. The LM5145 includes adaptive dead time control to prevent cross conduction of the FETs. I have also…
Hello Rakesh,
We have made the schematics using the device TPS23523 and the final gerber is going for manufacturing.
Though the schematic review was already done by you in the previous other thread.
I have attached the schematic for your review…
Hello John,
Thanks for your answer. Let me clarify some aspects of my current setup:
-To know the Junction temperature I'm using the RθJA from the datasheet, I know that it doesn't fit to my current design (I will try to adapt this value to my PCB…
