Part Number: DAC7760 Other Parts Discussed in Thread: DAC8760EVM , DAC8760
Our DAC7760 is sometimes reading an extra zero bit between the address byte and the first data byte. It doesn't happen all the time, but when it does, the problem will persist…
Part Number: DAC7760
The datasheet says that "The read register value is output MSB first on SDO on successive falling edges of SCLK."
Does it mean that SDO value changes on the falling edges of SCLK. So, if I want to get the stable value of…
Part Number: DAC7760 Dear team,
I can see below at datasheet of DAC7760.
What is main function of ISET-R port? Is there any advantage using 15Kohm ISET-R instead of using the internal Rset resistor?
- The customer use DAC7760 for 0 to 10V voltage output…
Part Number: DAC7760 Other Parts Discussed in Thread: DAC7750 , i am using DAC7750 for some testing and setting registers as follows (using SPI MODE 0): send_tDCS(DAC_Reset, 0x0001); // Reset registers to default
send_tDCS(DAC_NOP, …
Part Number: DAC7760 Hi Team,
I currently want to use the Daisy Chain method to control two DAC7760s, the first DAC7760 can be controlled (0v ~ 10v), But the second DAC7760 cannot be controlled, do you have a sample code or any information for me to refer…
Part Number: DAC7760 Other Parts Discussed in Thread: , DAC7750 , DAC8775 Dear team,
My customer would like to use 0~10V output and 4 to 20mA as dual output mode.
The question from customer is like below.
If the fault status like over range status happens…
Part Number: DAC7760 Dear team,
The latch function DAC7760 seems different from Chip Select function of SPI.
If we use single slave, can I use latch pin as a chip select function? For example, latch pin low => 24bit data => latch pin high ??
Please…
Part Number: DAC7760 Dear team,
I would like to use 0~10V output and 0 to 20mA or 4 to 20mA.
To get true zero output, do we have to use negative supply like general op amp?
Thank you.
Part Number: DAC7760 Hello,
My customer has an question for DA7760 datasheet.
The datasheet(SBAS528D) specifies its accuracy for voltage output on P6 ~ P7.
And some parameters are specified as FSR like the below.
This device has some voltage output…
Part Number: DAC7760 Hi Team,
Our customer reported that he is using DAC7760IPWP during 2 years for industrial DAC device but a few weeks ago he found some error on the output. According to our customer,
When he sent to setpoint to 33.33% to our device…