Part Number: TIPD125 I'm working with a TIPD125 evaluation board populated with all recommended components from the application note (SLAU525).
I've hooked the board up to a Teensy 3.6 for SPI comms and have correctly connected a +/-15V supply to VCC…
Part Number: DAC8560 Hi team,
I'm studying AO module and going through the TIPD 125. I get one problem about the TUE experiment results Table 7.
According to the TUE calculation formula, TUE = sqrt((offset erroor)^2 + (gain error)^2 + (INL error)…
Mohanmurali,
Based on the information you've provided, it doesn't sound like there is any problem with the PCB housing the DAC, uC, and amplifier. I don't have enough information about the "DC drive" board / solution to understand how a problem is being…
Part Number: LAUNCHXL-F28377S Other Parts Discussed in Thread: DAC8560 , TMS320F28377S , CONTROLSUITE Hello TI community,
I am currently trying to communicate to the DAC8560 ( http://www.ti.com/lit/ds/symlink/dac8560.pdf with my TMS320F28377S via SPI…
Other Parts Discussed in Thread: DAC8560 I planned to use DAC8560 DAC in my board. It has internal voltage reference of 2.5V and Vref pin is provided to source external reference. In spec sheet Vref pin description is mentioned as voltage input or output…
Other Parts Discussed in Thread: DAC8560 I have a DAC8560 on 2 prototype PCBs.
They both behave the same, VREF is putting out, but the DAC output does not no matter what code is sent to it.
I have verifed the SPI inputs with logic analyzer an oscope…
Other Parts Discussed in Thread: DAC8560 , DAC8560EVM I am using a TMS320F28335eZdsp to communicate with DAC8560 EVM.
The connection are:
GPIO18_SPICLKA---->DAC8560EVM's J2-3 SCLK
GPIO19_SPISTAn----->DAC8560EVM's J2-7 SYNC
GPIO16_SPISIMOA----…
Other Parts Discussed in Thread: DAC8560 Hello,
The datasheet for the DAC8560 states a power-up time of 2.5us from power-down when operating from 5V and 5us when operating from 3V; however, the power-down time is not specified. Is the time from full…
Other Parts Discussed in Thread: DAC8560 Hello,
I bought the DAC8560 EVM board. I plotted the output analog profile for the input codes from 0 to 65535 with the step of 15. I have get a completely nonlinear output. In fact it seems like for the majority…
Part Number: DAC8531 Other Parts Discussed in Thread: DAC80501 , DAC8411 , DAC53701 , DAC8560 Hi team,
I notice that DAC8531 is an very old device. For new promotion, will DAC8411 or DAC80501 is the better option?
Pls let me know your suggestions…
