Part Number: AWR1642BOOST-ODS Other Parts Discussed in Thread: DCA1000EVM , Hi,
I bought AWR1642BOOST-ODS whiles ago, and I have some concerns and am considering buying DCA1000EVM. I would like to ask if I can ask you for the data file of DCA1000EVM read…
Part Number: DCA1000EVM Hi expert,
now, I use mmwave studio 3.1.1.0 CLI TOOL to editor the DCA1000 EEPROM or Config to Capture data.
1. I use eeprom command to do it, the return as figure1;
2.trigger DCA1000 1000 to caputure data,the ip address as…
Part Number: AWR1843BOOST Other Parts Discussed in Thread: DCA1000EVM , AWR2243BOOST Hello,
I've been working with the AWR1843BOOST paired with the DCA1000EVM for capturing ADC data (I/Q signals) using mmWave Studio and MATLAB on Windows. However,…
Part Number: DCA1000EVM Hi expert,
Customer want to reduce ethernet packet delay on DCA1000 to increase the throughput. They are using studio CLI tool and change the packetDelay_us to 10 in json file.
But we measured the packet delay is still 25us. Is…
Part Number: DCA1000EVM Team,
in order to test a custom board with I/Os at 1.8V would it be possible to change the I/O voltage on the DCA1000EVM by changing the feedback network from U2 ? (i.e. the ratio of R14/R15) ?
If there some conflicts but they…
Part Number: DCA1000EVM
Hi expert,
I use DCA1000 default ethernet configuration data to caputure ADCdata,the default Ethernet delay is pre-programmed as 25 µs in both the FPGA and software, so ethernet throughput varies up to 325 Mbps.
Now I want…
Part Number: IWR1443BOOST Other Parts Discussed in Thread: UNIFLASH , , DCA1000EVM Hello everybody,
I tried to run the Quick Start Demo for the DCA1000EVM, which is attached to an IWR1443BOOST, but I failed. The most obvious sign for this was the MSS firmware…
Part Number: IWR6843AOPEVM Other Parts Discussed in Thread: MMWAVEICBOOST , DCA1000EVM I am trying to run this demo: https://www.ti.com/video/5827389052001#transcript-tab When clicking on SPI connect I keep getting this error: [11:28:29] Status: Failed, Error…