Part Number: DDC114 Hi Team,
Good day.
We received query from customer and want to confirm if the minimum non-continuous mode integration time is 50us for this device. Because the integration time (non-continuous) found in electrical characteristics and…
Part Number: DDC114 Other Parts Discussed in Thread: DDC316 , IVC102 Hi Team,
Our customer is using DDC114 to collect 3 channel 100pA(max.) current. Before 3k sampling rate is ok. However, they want to increase the sampling rate to >=6ksps.
From our…
Part Number: DDC114 Hi Team, We have a customer that has some couple of inquiries with DDC114 that we hope you can help us out. - The customer is planing on controlling DDC114 in fNIRS circuit with a Atmega644P and wanted to ask if this has any sample C code…
Part Number: DDC114
Hi, I am currently working with a DDC114 with a custom board. I get the following value in TEST mode in RANGE 7 on channel 1. When i read the datasheet, on range 7 with 0pF detector the noise shall be 3.7 RMS noise (PPM FSR).
At 3 sigma…
Part Number: DDC114 Hello guys,
One of my customers is considering using DDC114 for their new products.
They have a question about DDC114 spec discription as the follow.
Q, DDC114 datasheet says that "±0.01% Reading ± 0.5ppm FSR, typ" and "±0.025% Reading…
Hi Cyril,
It's been a while but I thought to send you some data we took recently, in case it can still be of any help for you or someone else reading this... We took a DDC114 and ran several experiments:
Not sure if it is clear or not but basically…
Part Number: DDC114 Hello Team
My customer is using DDC114. Now they measure the offset value, no connect to DDC input. When the Tint is different, the offset values is different. Attached are the detail information. Could you give some comment about…