Hello Huageng,
Thank you for your feedback on the application. We will check our current platforms and if we have any specific recommendations to move forward.
Our highest resolution devices are coupled with the DLPC900 controller. The devices have 2M…
Part Number: DLP160CP Other Parts Discussed in Thread: DLP160AP , , DLPDLCR3010EVM-G2 , DLPLCRD-GUI
Dear DLP customers and E2E users,
We are happy to announce the introduction of the new 0.16” nHD/QnHD DMDs: DLP160CP and DLP160AP. Using our existing portfolio…
Part Number: DLPNIRNANOEVM Hi have downloaded/ redownloaded DLP Nirscan Nano GUI multiple times, but the display of the scan section is glitched. The spectrum plot axis is unusually zoomed in and I can not input any values in the left column (image below…
Hello Satoh-san,
Mr. Soucek is correct if used within the datasheet operating conditions there should not be a problem. If the energy density is concentrated in an area such that the over all power is within the specification, but the irradiance in some…
Hello Rahav,
Could you please details about your application and use case? This will help us answer your question more effectively.
Rahav Raviv said: Is this light source and husing get heated or it is safe for human skin?
It is relative very low power…
Part Number: DLPC150 Other Parts Discussed in Thread: DLPC350 1. Can flash be programmed from the DLPC150 by commands issued through the I2C interface? If so, what commands should be used?
2. Is there an equivalent mode in the DLPC150 like Mode 1 in the…
Part Number: DLPNIRNANOEVM Other Parts Discussed in Thread: DLPC150 , TIDA-00554 We have a DLP® NIRscan Nano EVM and want to connect directly to the DLPC150 DMD Controller PCB. Could TI send the schematics for all 3 boards on the EVM? - thanks John
Part Number: DLP9500 Other Parts Discussed in Thread: DLPC410 , DLPC900 I don't have much experience in developing the DLP device, so I got a few questions.
I want to play thousands of images(1080x1920 BMP) on an endless loop. But I find it very hard…
Hello guys, do you think it is possible to use a DLP as a mirror?
I have seen this evaluation that indicates the reflectivity of DMD is 80%+
www.ti.com/.../dlpa083a.pdf
But I would like to know if the image would form properly on the micromirrors or would…
