Other Parts Discussed in Thread: DLP4710 , DLP4500 : In the DLP4710 project, there is also a control delay of approximately 40μs, as shown in the figure. This issue has similarly caused a non-linearity problem during the 127-to-128 grayscale transition in…
Hello WD,
For the DLP4500 you should do as expected and change the .ini file within the DLPC350PROM download for the below settings:
DEFAULT.RED_STROBE.RDELAY 0xBB ; <187> DEFAULT.RED_STROBE.FDELAY 0xBB ; <187> DEFAULT.GRN_STROBE.RDELAY 0xBB…
Hello User,
It appears my response on yesterday did not post correctly.
It is acceptable to use the 5 0° incident angle, but at that angle the AR coatings are not as efficient, so I am not surprised by the 40% efficiency. Also given the small NA you are…
Part Number: DLP3010EVM-LC Other Parts Discussed in Thread: DLPA2005 , DLPC3478 Tool/software: Hello,
I am facing the same issue as reported in the post https://e2e.ti.com/support/dlp-products-group/dlp/f/dlp-products-forum/1284285/dlp3010evm-lc-dlp-evm…
Part Number: DLP4500 Tool/software: Dear TI team,
At Alvéole we are integrating DLP4500 products into our PRIMO device which enables to project images and achieve photopatterning of proteins on surfaces.
We have been observing in the past years…
Hello Patrick,
That flash chip should be good.
Those voltages are definitely not correct, could you advise what version of software you utilizing? How are you programming the DLPC3478 controller? Is this a modified EVM or your own design? If it is you…
Hello Yai,
In order to to this you should send a full white image, you could also use the test patter generator white solid field or white image curtain. Please note that The mirrors will still switch in the off position for a small segment to of each…
Part Number: DLPLCR4500EVM Tool/software: As per the video on How to Select the Resolution and Configuration for 3D Machine Vision Applications ( https://www.ti.com/video/5045120761001?cu=1127611#transcript-tab)
What is the Mirror Pitch for DLP LightC…
Part Number: DLPC4430 Tool/software: Hi there,
Could somebody let me know where to find the DLP composer tool mentioned in the DLPC4430 programmer guide?
Thank you.
