Part Number: DLP3010EVM-LC Other Parts Discussed in Thread: DLPC3478 , , DLPDLC-GUI Dear Members
I am checking the function of TI GUI Tool before developing the scanner.
After finishing "Program and Load pattern" without Errow or Waring message , it always…
Part Number: DLP3010EVM-LC
Dear TI Memembers
I am checking the beam pattern sequence for internal mode and will captue pattern image under camera 30fps.
[Remark]
Test Pattern set was used only for simple testing.
It was happen to silmilar issue when…
Part Number: DLPDLCR3010EVM-G2 Other Parts Discussed in Thread: DLP3010EVM-LC Hi,
We are looking for a DMD for to project a static, stable pattern using a single colour in the visible (could be broadband or monochromatic). We want to capture the resulting…
Part Number: DLP3010EVM-LC Other Parts Discussed in Thread: DLPA2005 , DLPC3478 Dear TI members
I am using DLP3010EVM-LC and have 2 questions.
Q1) Abnormal Internal Pattern Mode Operation depending on TI FW.
A)FWSel_DLPC3478_DLPA2005_pm1_i2c0x36_v8p0p0…
Part Number: DLP3010EVM-LC Hi
We are controlling a DLP3010EVM-LC using I2C over USB (from C# on a Win10 PC).
I have wrapped " cyusbserial.dll " just like your DevGui (DLP EVM GUI 3.2.0.6) is doing in your " DLPComposer.IO.DLPC34xx.I2CComm…
Other Parts Discussed in Thread: DLP3010EVM-LC , DLPC3478 Dear Ti.
Regarding case: CS2085172, we were diagnosed via email that the DMD is not working on the device.
They help me know what else they require from us so that they can please authorize the…
Part Number: DLP3010EVM-LC Other Parts Discussed in Thread: DLPA2005 , DLPC3478 Dear TI Members
I am using Beam FW after downloading into our products under 20Hz/8bit/3pattern/GUI2.2.0.5 conditions.
But , there is abnormal symptom using FW that made from…
Part Number: DLP3010EVM-LC Other Parts Discussed in Thread: DLPC-API Hi
We have a DLP3010EVM-LC and need to control it from C#. (Win10 PC)
It there any documentation in .Net / C#?
Is there a programmers guide documenting the different commands?
When using…
Hello Kristen,
Thank you for your patience.
Kristian Thomsen said: Question 1 Just to be clear we need to turn on/off the LED lights electrically over a gpio. The SW_ON/OFF switch appears to be physical switch? Can this switch be overridden electrically…
Hello Sharayu,
If you don't have any further updates, I will go ahead and mark the thread as closed. Please don't hesitate to continue or open another thread if you have a question.
Best,
Maximus