Hello Sinuo,
Thank you for reaching out to us.
Please try to program the FPGA in your dual DLPC900 EVM. The binary file (.jic) and Instruction manual are provided in the DLPC900REF-SW installer.
Thank you,
With regards, Aishwarya
Hello Godwyn,
TI does not provide any Linux drivers for the USB interface, but the source code is in the SW folder installed with 5.1.0. If you installed it in the default loacation (and assuming your system drive is "C") then it will be in:…
Hello Joe,
This will depend on what the IT receiver is capable of. My understanding is that the IT6535 receiver is designed for 60 Hz on DP.
To alter the EDID you will need to start with the DP EDID found by default in "C:\Texas Instruments-DLP\DLPC900REF…
Part Number: DLPC900REF-SW Hello, Few years ago we modified “LightCrafter 6500 and 9000 Firmware and Software Bundle” version 2.1.1 to suit our connectivity needs to the DLP. We received a new batch of DLPs that require newer software and firmware…
Part Number: DLPC900REF-SW The product page for the DLPC900REF-SW download does not load correctly. It is essentially a blank page with no options to actually download anything.
Part Number: DLPLCRC900DEVM Other Parts Discussed in Thread: DLPC900 ,
Hi,
I have a DLPLCRC900DEVM and trying to figure out to reload the bootloader. Thus, I followed instructions from Dual DLPC900 EVM User's Guide pages 57-59 ( https://www.ti.com/lit…
Part Number: DLPC900REF-SW I found Qt project in C:\Texas Instruments-DLP\DLPC900REF-SW-4.0.0\DLPC900REF-GUI\Sources\GUI. I tried to rebuild with Qt v5.3.2 and latest v5.12.1. However, both versions showed something of errors. Which Qt version should…
Part Number: DLPC900REF-SW Other Parts Discussed in Thread: DLPC900 I am using the DLPC900 over a USB connection. The current firmware we are using has the LED display a solid white image on power up. Is there a way to alter the firmware so the device…