Hi Yujie,
Please see the following section in the user guide about how to check the image load time from flash.
Section 3.3.3.
https://www.ti.com/lit/ug/dlpu011f/dlpu011f.pdf?ts=1665079712695&ref_url=https%253A%252F%252Fwww.ti.com%252Ftool%252FDLPL…
Part Number: DLPLCR4500EVM
Hi Team,
Our customer contacted iView, the manufacturer of the light engine of the DLPLCR4500EVM. iView mentioned that there is a change of the DMD from STP to TP. Hence, the built-in light engine is EOL by the manufacturer…
Part Number: DLP4500 Other Parts Discussed in Thread: DLPR350 Dear TI,
I encounter checksum mismatch issue when uploading firmware. The error message pop up is "Checksum mismatch: Expected 172a2471; Received 10264375".
I am using Lightcrafter…
Hi Nick,
I am not sure what is it you are trying to do, Could you please elaborate on that.
From the contents of .ini file, pattern sequence mode is set to play once and the trigger is set to internal. So the DMD is expected to run the sequence once and…
Hi DSR,
As we mentioned earlier the inserting black with pattern lut # 24 (0 index based) is something not fully tested for different exposure settings and timings. Since the splash approach is working at the expense of losing one exclusively for this…
Hi User, Welcome to TI E2E Forums! Kindly note the following:
The steps to attach an image with the FW is :
1. Download and install LCR4500 GUI v4.0.0 from here : http://www.ti.com/tool/DLPLCR4500EVM
2. Download and install DLPC350 FW v4.1.0 from here …
Hi Siket,
Welcome to the Forum, and thanks for showing interest in DLP Technology.
Please see the v3.1 firmware here : http://www.ti.com/tool/dlpr350
Thanks,
Navneet
Hello Nikhil,
I would recommend uninstalling any drivers that are related to the DLPC350 so they will again be reinstalled by Windows. You can also reinstall the GUI ( www.ti.com/.../dlplcr4500evm) . Lastly, if you changed the firmware at all please reflash…