Part Number: DP83822EVM Other Parts Discussed in Thread: USB-2-MDIO , Hi team,
There are my testing step.
1. I used USB-2-MDIO to set DP83822EVM Analog loopback mode following below Register setting;
2. I sent the data=0xa5 to DP83822EVM by MII and enbale…
Part Number: DP83822EVM Other Parts Discussed in Thread: AM3352 Hi Team,
Customer has urgent project status that needs to quickly check functionality by flying wire AM3352 with DP83822EVM through RGMII on 2 exact same setup.
The communication btw 2 setup…
Part Number: DP83822EVM Hello,
I am testing the RMII mode with my external MAC.
I followed everything I think should be followed in order to enable RMII, but I cannot manage writing RSCR correctly.
Phy is working in master mode with 25MHz clock.
The…
Part Number: DP83822EVM Hello,
The customer plans to test FPGA board and DP83822EVM for evaluation. RMII interface through put is 50MHz clock. The customer has concern about the connection between FPGA board and DP83822EVM.
[Questions]
1) Have TI worked…
Part Number: DP83822HF Other Parts Discussed in Thread: DP83822EVM Hi experts,
Customer is using DP83822HF in 100BASE-FX mode, however due to some reason the signal detection feature is disabled through pin strap of RX_ER (configured in MODE 1). Now customer…
Part Number: DP83822EVM Dear Team,
One of our customers would like to get design files for this EVM. Is it possible to provide the gerber files?
Best Regards,
Caglar
Hello,
I'm trying to generate test pattern with the DP83822 for the 10BaseTe.
In the application note http://www.ti.com/lit/an/snla266/snla266.pdf and http://www.ti.com/lit/an/snla239a/snla239a.pdf I don't fine how to configure the registers for "All…
Part Number: DP83822EVM Hello,
My customer want DP83822EVM to evaluate, do we have some example code to run this EVM?
I didn't find code on TI.com, thanks.
Part Number: DP83822EVM hey,
I am working on CAN to USB converter project.
going to have Ethernet as well on the board.
Can I get the DP83822 EVM Design Files for the reference.
Part Number: DP83822I Other Parts Discussed in Thread: MSP430F5529 Hi,
I just got a DP83822EVM and want to test the SPEED LED. I tried to populate the J11 to make the SPEED LED pull up or pull down, but can't have this LED work. The related LED is…