Part Number: MSP-EXP430F5529LP Other Parts Discussed in Thread: DP83867IRPAP-EVM , USB-2-MDIO , UNIFLASH , MSP430F5529 The MSP430F5529LP launchpad and DP83867IRPAP-EVM were intended to be connected using the USB-2-MDIO tool. However, the PHY ID is not found…
Part Number: DP83867IRPAP-EVM Other Parts Discussed in Thread: AM3358 Hi,
I want to use the DP83867IRPAP RGMII interface with AM3358's RGMII interface. I wish the RGMII interface should be configured like the following after I design the strap pins:…
Part Number: DP83867IRPAP-EVM Other Parts Discussed in Thread: USB-2-MDIO , MSP-EXP430G2ET , UNIFLASH Hello team,
My customer is trying to set PHY configuration via USB-2-MDIO SW Tool.
Could My customer checked the MDC waveform.
However, customer sees the…
Part Number: DP83867IRPAP-EVM
Hi experts:
I want to know the reason to cause the DP83867 phy working exception because of common mode interference?
thanks.
Hi Aniruddha,
I found that the reserved bit is set in DP83867IRPAP-EVM as follows:
Address 0x006E is: 0x0000. Address 0x006F is: 0x0100.
Bit[8] is set. Is it normal?
Anyway, writing the value 0x1F508 to the address 0x01D5 register of DP83867IRPAP-EVM returns…
Part Number: DP83867IRPAP-EVM Other Parts Discussed in Thread: DP83867IR Hi Experts,
Does DP83867IRPAP-EVM support PCIE transceiver interface?
Thanks~!
Derek
Part Number: DP83867IRPAP-EVM Other Parts Discussed in Thread: DP83867CS , DP83867IR , Hello
Customer is considering to use DP83867CS and DP83867IR.
Interface is GMII or RGMII.
1. Can we use DP83867IRPAP-EVM for GMII evaluation as DP83867IR and RGMII evaluation…
Part Number: DP83867IR Hi,
Are there any revisions to DP83867IRPAP-EVM?
I have an old EVM. I would like to know if there is new revision one. If yes, please let me know how to know revisions of EVM.
Regards, Kenshow
Hello Avtar
Can you please point out the correct Procedure to detect the SFD on DP83TC812EVM-MC.
What registers ( address, data) need to be programmed in order to detect the SFD on this DP83TC812EVM-MC. ?
As per the following TI Spec ( Section 4, Page…
Part Number: DP83867IRPAP-EVM Hello,
I've tried the board with the Auto-Enable board and I'm receiving signals correctly to the oscilloscope. When I try to force the board to work at 100Mbs the Rx stops receiving but the Tx keeps working.
In the…