Part Number: DRV5033 Other Parts Discussed in Thread: DRV5032 , TIDA-00405 Hi,
My customer hopes to use DRV5033 to replace mechanical limits in 3D printer.
However, customer worries that the B-fied of all magnets cannot be consistent, so customer need to test…
Part Number: DRV5033 Hi team.
My customer needs the samples with magnetic property data.
Is it possible to provide it?
If it is NO, Is it possible to provide other data?
Sincerely.
Kengo.
Part Number: DRV5033 1. Using the DRV5033 sensor device, the N and S poles are close to each other, and both act the same. 2. When the chip is assembled into the circuit, if only the N pole is used to confirm the operation, can it be determined that the…
Part Number: DRV5033 Hi,
The magnet has a conduction state close to the Hall. Stay away from the Hall and have an open circuit. Is this threshold value defined in the actual application?
thanks.
Part Number: DRV5033 Hi team,
I have one question in using DRV5033:
If the magnet is sensed on the side of Hall, which direction is better for Hall to place?
thanks.
Dear Mitch,
Thank you for your reply.
Could I have more questions?
1. If the Vcc is changed rapidly from 2.8V to 5.0V with DRV5033, do the first and second noise occur?
And what about 3.3V to 5.0V?
2. You said that the second dip is a result from…
Part Number: DRV5033 Hi team,
I have a few questions on magnatic sensitity of hall sensors:
1. What's the definetion of it?
2. How is the spec impact our design? Say I want to design a knob with magnatic field. How should choose which sensitivity…
Part Number: DRV5033 Dear TIer
i want us DRV5033. DRV5033 only one output signal is provided. But I need two outputs, and this two output signal is inverted to each other.。
Please recommend or recommend the relevant reference design。
Part Number: DRV5032-SOLAR-EVM Other Parts Discussed in Thread: DRV5033 , HALL-ADAPTER-EVM Hello,
I want to use DRV5033 instead of the micro switch we currently have. The functionality of the micro switch is to inform the controller when the sprinkler has…