Part Number: DS90UB914A-CXEVM Other Parts Discussed in Thread: DS90UB964-Q1EVM Hello to all, i'm Giuseppe from Italy.
I would love to know if there's an evaluation board or something similar with which is possible to connect the output of DS90UB914A…
Part Number: DS90UB914A-CXEVM Dears,
My Customer just test 914A EVM and found the eye diagram is very poor.
And the LOCK LED status is abnormal(blinking).
Below is the hardware connection and the test report as attached.
Please give me suggestion…
Part Number: DS90UB914A-CXEVM Dear all
I had check the DS90UB914A-CXEVM User's Guide, there is not sch and PCB source file, Could you share me with sch and PCB source file ? Thanks a lot.
Part Number: DS90UB914A-CXEVM
KA4909 is quite difficult to buy can I replace it?
I have a very compact device I would like the replacement did not occupy more space on the board
Can I use SRR4828A-820M?
Part Number: DS90UB914A-CXEVM Other Parts Discussed in Thread: ALP , USB2ANY When I open the Analog LaunchPAD software with my device connected, I get two errors. It says,
"The connected <unknown device> has a firmare version (0.0.0.0) that is not supported…
Part Number: DS90UB914A-CXEVM Other Parts Discussed in Thread: ALP I am trying to utilize ALP with my deserializer and camera. However, the user guide requires that I need three file (P954_SETUP_A0_4G.py, P954_A0_RX0_CSI_Enable.py, and ovt_1280_1080_30fps_REMOTE…
Other Parts Discussed in Thread: DS90UB914A-CXEVM , USB2ANY , ALP Hi Team,
I got a DS90UB914A-CXEVM board and installed the "Analog LaunchPAD".
And now I can connect the USB2ANY dongle.
But I'm not sure that I can access the registers of DS90UB914A…
Other Parts Discussed in Thread: DS90UB913A-CXEVM , DS90UB914A-CXEVM I would like to confirm VDDIO setting for DS90UB913A-CXEVM & DS90UB914A-CXEVM.
1. Can we use 1.8V VDDIO for these board? The default setting for these board is 3.3V VDDIO and I don…
Other Parts Discussed in Thread: DS90UB914A-CXEVM , DS90UB913A-CXEVM , ALP I would like to confrim the method of the setting for DS90UB913A-CXEVM & DS90UB914A-CXEVM by ALP.
The customer set the board and ALP, but they and I don't know how to send the…
Other Parts Discussed in Thread: DS90UB913A-CXEVM , DS90UB914A-CXEVM Dear Technical Supprot Team,
I have a question about DS90UB913A-CXEVM & DS90UB914A-CXEVM.
This EVM has pull-up and pull-down for pallarel interface such as DINx , ROUTx.
http…
