Hello,
We are using 4 Stellaris EKS-LM4F232 Evavuation Kits as part of a university research project testing the voltage variability of the boards along different running - sleep modes. After taking measurements for 3days without problems the 4th day…
I am evaluating the TI CSS/compiler against IAR. I am looking at the hello.c program on the EKS-LM4F232. My first edit was to change the baud rate to the virtual serial port. It did not work so I stepped into UARTStdioInitExpClk which passes the parameters…
Ki-Soo, Thanks for your speedy answers.
On the Visual Studio Key map, the png you reference must look at a different version of CSS. I am using the CSS that shipped with EKS-LM4F232 (4.2.5), which looks like it includes Eclipse 3.1 or 3.2 with what…
Hi Jan,
I'm sorry to hear that you're having trouble getting your UART to work. The first thing I would do before making any modifications to your code is to try running the uart_echo example project. For the lm4f232, you can find this in your StellarisWare…
Hello. Installed Code Composer v5.2 on a Ubuntu 11.10 64 bits distro. Working with a EKS-LM4F232 development kit. I was able to connect the development board thanks to this post:
http://e2e.ti.com/support/microcontrollers/stellaris_arm_cortex-m3_microcontroller…
Other Parts Discussed in Thread: CCSTUDIO I have a problem with launching a project in Code Composer studio Version 5.2.0.00069.
I use the evaluation kit Stellaris EKS-LM4F232.
When I press the debug button it starts initializing and downloading the…
Hi Santosh,
First, I apologize for the quality of the photo but all I had was my phone. Below is an image of the setup however, since you are using a custom board, the cable between the DK and your board might be different. I used an EK-LM4F232 for…
Do we recall correctly that yours is an official EK232 Eval Board - thus the HW is not suspect?
Assuming correctly implemented (and surviving) HW - usual suspect in such case is program placement @ "unexpected/illegal" location. Have you attempted to…
Hi Charles,
The Stellaris family of microcontrollers certainly allows for field updates via the USB connection (via the USB DFU). To address some of your questions:
If the first two words of the MCU's on-board flash memory are blank, the MCU will…
Hello,
I'm trying to get M1PWM2-5 working on a LM4F232H5QD (EK-LM4F232 Keil). I can get PA6, PA7 and PF1
working but can't get any signal from PF0. I have tried everything I could think of and still no luck.
Can anyone please go through this…
