Part Number: ESDS304 Other Parts Discussed in Thread: MAX3232 , TPD2E007 Hi,
I am using ESDS304DBVR ESD diode for Max 3232 UART transceiver o/p pins TX and RX at the connector end.
and with this ESD diode i am not able to detect the device or communicate…
Part Number: ESDS304 Hi E2E Team,
I am planning to use ESDS304 in my design to protect the Ethernet interface (1000BASE-T) from ESD and EFT. As per my understanding the 1000BASE-T signals are encoded using PAM5 encoding scheme in which voltage levels…
Part Number: ESDS304 Other Parts Discussed in Thread: ADS8681 Hi there.
I'm using 3.3V 10MHz SPI signals in a design and need to protect them from transients.
I found the ESDS304DBVR and was wondering if it's suitable for my application.
The…
Other Parts Discussed in Thread: ESD341 , ESDS304 , ESDS302 , ESDS314 , ESDS312 , TSD05 , TVS0500 Hi,
I have an ethernet port and a serial RS232 interface in my design that I am trying to protect against ESD, EFT, and surge to comply with IEC 61000-4-2, IEC…
Part Number: ESDS314 Other Parts Discussed in Thread: ESDS304 , ESD204 Is ESDS314 able to protect 2.5Gbps EtherNET PHY? or what alternative solution? thanks,.
Regards
Brian
Hi McKenzie,
Thank you for your reply.
You mentioned ESDS304 and ESDS314 is for Ethernet application.
So I'd like to obtain reference design Ethernet PHY with ESDS302 or ESDS314.
I think it helps customers understand more deeply
I appreciate your…
Part Number: ESDS314 Other Parts Discussed in Thread: TPD4E05U06 , , ESDS304 , TPD4E1U06 Hi experts,
My customer need to design the protection for PHY DP83822IR, I find there are four selections to meet the function:
ESDS314, ESDS304, TPD4E05U06, TPD 4 E1U06 …
Hi Matt,
thank you for the replay and the AppNote.
After learning more about the diodes, all that i proposed and also the ESDS304 are suggested at the PHY side.
As we are doing PSE injector we don't have a PHY but only the magnetics transformer ( one…
Below are the latest recommendations of devices for multiple interfaces that provide you IEC protection and paired with low capacitance that minimizes impact to bandwidth in the system. Please also refer to our System-Level ESD Guide for more details…
Hi Matt
The trouble is I am not that familiar with Ethernet or ESD protection, and had assumed I could just use the part in TI's design guidelines for the TM4C1294 which now is appearing to be not the case.
I had been looking at the ESDS304 as a possible…