Hi Leo,
Thank you for your reply.
After commenting out USSLibGUIApp_Delay () and setting it in the GUI and confirming that it started working, I disconnected the GUI and measured signals(X1 and X2 of J5 and J6 in EVM430-FR6043) with an oscilloscope…
If you are using the code examples of EVM430-FR6043 , it is not recommended to manually control the USS XTAL. The USSXTAL is automatically controlled by the code example.
The startup time for the USSXTAL is maximum 1.9ms for crystal resonator and 0…
Hello Ferran,
We have not done extensive clamp on testing with metal pipes. There is extra attenuation going through the metal and there can also be signal that rides along the outside of the pipe producing noise on the receiving transducer. Some basic…
Hi Eddie LaCost
Thanks for the reply i have the issue on attaching the image so i just create a new thread
https://e2e.ti.com/support/microcontrollers/msp430/f/msp-low-power-microcontroller-forum/991182/evm430-fr6043-no-signal-detected-in-up-and-downstream…
Part Number: MSP430FR6043 Other Parts Discussed in Thread: THS3110 , EVM430-FR6043 Hi there,
I had built an ultrasonic sensing board for gas meter with MSP430FR6043.
I used THS3110(with power down control) as the receiving and transmitting op amps…
Other Parts Discussed in Thread: EVM430-FR6043 Hello,
I am using an EVM430-FR6043 board and I have the output as programmed positive pulses. But it is not possible to generate the negative pulses with this board. Hence I would like to design a peripheral…
Part Number: MSP430FR6043 Other Parts Discussed in Thread: EVM430-FR6043 , , TIDA-01486 Hi,
I have EVM430-FR6043 and want to use it for one of my application which includes 4 transducers. As mentioned by you in one of your threads on forum that you…
Part Number: MSP430FR6043 Other Parts Discussed in Thread: MSP430WARE , , EVM430-FR6043 , TDC1000 , TDC7200 , CAPTIVATE-PGMR
Tool/software: Code Composer Studio
Hello,
I've created a custom board with MSP430FR6043. I've used the "EVM430-FR6043"…
Part Number: MSP430FR6043 Other Parts Discussed in Thread: EVM430-FR6043 Hi,
I have been working with EVM430-FR6043 since last few weeks. And now want to design my own board using MSP430FR6043 IC for one of my application. For which going through the…
Hello,
The header file that you attached - USS_userConfig_EVM.h - is from an earlier version of the USS SW while the other header file you are using with your enterprise board - 3527.USS_userConfig.h - seems to be with a later version of the SW. You…
