Part Number: EVMK2GX
Explain the steps, prerequisites, and environment setup to generate the PDK example projects which come along with TI-RTOS SDK for the K2G Family of Processors.
Hi Vishnu, I looked over the parameters you used for creating the ubifs/ubi files, and they looked matching the mtd partition from running "mtdinfo -a". But I noticed something worth you double checking:
VISHNUVARDHAN VATTE said: root@k2g-evm:…
Part Number: EVMK2GX Other Parts Discussed in Thread: SYSBIOS Hello,
I am setting up the SPI to communicate with the NorFlash on the K2G Evm and I am not able to get reproducible correct reading when using BLOCKING mode ( with interrupt enable).
What…
Part Number: EVMK2GX Hi !
I wanna use four SPIs to connect ADC and our custom module under the TI linux. A NOR flash memory on SPI1 will be removed and then SPI1 may be used to connect our module.
When K2G EVM is booted in linux, any spi device driver…
Part Number: EVMK2GX Other Parts Discussed in Thread: UNIFLASH Hello,
Reading "Platform Development Kit 7_0_0" page,
https://software-dl.ti.com/jacinto7/esd/processor-sdk-rtos-jacinto7/07_00_00_11/exports/docs/pdk_jacinto_07_00_00/docs/userguide…
Part Number: EVMK2GX Not able to connect with USB XDC 200:IcePick_D: Error initializing emulator: (Error -2083 @ 0x0) Unable to communicate with the debug probe.
Board was unpacked and verified functions. Connector was connected to a) XDS200 and b)USB…
Part Number: EVMK2GX Hello ,
I tried created a simple RTOS project named armBIOS. I can build it without error. But I cannot download it K2GEVM board.
Error prompt as below picture.
Please help check what wrong.
Thanks.
Hello Vishnu,
I apologize for the delay, I am currently looking into confirming this documentation error. If so, I will also see if we can update our resources accordingly. While I do this, has there been any change in your application's status (i.e have…