Part Number: F28M36P63C2 Other Parts Discussed in Thread: C2000WARE , CONTROLSUITE , Hello,
I am looking into the possibility of achieving SIL2 level of functional safety for our system which uses F28M36P63C2 microcontroller. Could you please give me some…
Part Number: F28M36P63C2 Other Parts Discussed in Thread: CONTROLSUITE
Dear team:
My customer uses the on-chip ADC1 and ADC2 for sampling testing with the following settings:
Use the routine in controlSUITE and modified as:
The input port of ADC1 is…
Part Number: F28M36P63C2 Hello Champs,
For F28M36P63C2ZWTT, the below TEMP value of DID1 register is read out as "0x10":
But for F28M36P63C2ZWTS (-40~125), what about this TEMP value of DID1 register? There is no description in the manual.
…
Part Number: F28M36P63C2 Hello,
We use a custom board with Concerto F28M36P63C2 and a XDS200 USB debugger.
After a flash programming procedure with our custom tool we cannot connect to M3 core anymore and the CCS displays the following message
We tried…
Part Number: F28M36P63C2
Hi, I have a problem with initializing some shared RAM blocks with the M3 subsystem after a watchdog reset.
This is my code. It works after a power on reset but gets stuck in the while loop after a watchdog reset.
RAMMReqSharedMemAccess…
Part Number: F28M36P63C2 Hi,
I am trying to read the logic low condition on an external peripheral using F28M36P63C2's GPIO12,13 and 14. There are no decaps on these pins but I am using an external 5K pull up with a 1500 pF filter cap on all these lines…
Part Number: F28M36P63C2 Hi, support team
My customer needs a substitute of F28M36P63 I found a TMS320F28388DPTP with similar functions. But Inventory is also low.
Could you provide other substitute of F28M36P63 with better Inventory ?
Thanks so much. …
Part Number: F28M36P63C2 Hello,
Is there an excel sheet or matlab scipt that models the attached document "PR Controller mapped to 2p2z"?
Thanks,
Srini
Part Number: F28M36P63C2 Team,
Several GPIOs support the input qualification feature, see datasheet chapter 5.9.6.2 GPIO - Input Timing. Is this feature available for GPIO21 when used as 'McBSP-A receive data' ? So that the McBSP input goes through…