Hi Peter,
It is not unusual for the hex file to be non-continuous like this. I noticed that the error you are getting is a verify error. This would indicate that the serial flash programmer is reading the flash but not reading back the expected values…
Part Number: TMS320F28377D Other Parts Discussed in Thread: UNIFLASH , C2000WARE Hi,
I am using C2000 Ware serial flash programmer utility to download .hex file.
Here is my linker file:
MEMORY { PAGE 0 : /* Program Memory */
/* Z1 OTP. LinkPointers */ DCSM_OTP_Z1_LINKPOINTER…
Joan Zhou said: It is said it required that the bin file dosen't run before generating a "good" hex files. otherwise, the hex file can't run on other pcbs. It seems that the bin file will change the content of flash after running. However, it is very…
Hi Øyvind,
Thank you for the response.
Øyvind K said: From the screenshot of UniFlash it looks like you have a CC1312R7 device?
Yes.
Øyvind K said: This is not supported by the SmartRF Flash Programmer 2. Further development of SmartRF Flash Programmer…
Hi Angelo,
Glad that you seem to resolve the issue. I will close the ticket for now. If you have any update you can write to this post and the post will change its status to OPEN automatically.
Part Number: CC2642R Hello,
I have a weird bug occurring with a CC2642 board where it will not let me program it directly through Code Composer Studio, however it does let me program it through Flash Programmer v2.
However, since I my program is using…
Part Number: MSP-GANG Hello, I am attempting to pull image files stored only on the programmer so that I can back them up. I understand how to pull/read a program file from a board connected to the MSP-Gang programmer, but am struggling to figure out…
Part Number: TMS320F28035 Hello TI Team.
I want to program F28035 MCU device by Serial flash programmer.
To do it I used the hex2000 tool as a post build in CCS via command:
"${CG_TOOL_HEX}" -boot -a -sci8 "${BuildArtifactFileName}" -o "${BuildArtifactFileBaseName…